1. Before installation, check whether the sewage pipe is unblocked and the installation floor is clean.
2. Install the matching sealing ring on the drain outlet of the toilet.
3. Determine the installation location of the toilet. Lay the toilet (sewage outlet) at the pipe drain and slowly lower it, adjust the correct position, and then (with chalk or whiteboard pen) mark the line around the toilet and determine the mounting hole.
4. Hit the mounting hole. Align the anchoring wire with the foot and mark the hole with a hammer drill (10 mm in diameter and 60 mm in depth) and insert the expansion rubber nail. (Generally, there is no need to install a foot sill) Toilet
5. Put a glass glue on the inside of the marking line.
6. Align the mounting hole and the surrounding glass glue on the toilet and slowly press down until it is level.
7. Put the glass glue on the joint between the toilet and the ground, and trim the circumference to ensure the appearance.
8, install the ground wire.
9. Connect the inlet pipe and check if the filter is installed.
10, clean the ground and tools, it is forbidden to use immediately (glass glue curing usually takes 24 hours), keep the toilet around 24 hours without contact with water.
CNC Cutting is our specialiity. We could offer Cnc Carbon Fiber Cutting frames which are cutout from kinds of Carbon Fiber Sheets. While the most popular one is 3K 100% full carbon fiber cnc cutting frames. Smooth cutting, countersinking, chamfering are available with high precision according to your requirements. Both Silk screen pringting and Inlay logo are offered. Confidentiality is as important as quality. Thus We are Protecting customers` design and products. If you need, we could sign NDA agreement as well. After getting drawings,we could offer you quotation and samples. Any questions or needs, please send us an RFQ. We will reply to you as soon as possible.
Cnc Carbon Fiber Cutting,Cnc Drone Frames,Cnc Carbon Fiber Frames,Cnc Router Carbon Fiber Cutting Frames
Hobby Carbon CNC Technology(Shenzhen) Limited , http://www.hobbycarbon.com