After the printing plate machine is used for a period of time, the internal liquid tank is prone to crystallization, scaling, etc., especially in the case of relatively hard water, this situation is more likely to occur. This situation is obviously much better than that of the earlier film processor, but as a tool, there are always problems in the process of use, so this requires some maintenance. How to clean when the printing plate machine produces dirt? Today, the plastics industry website - Jiuzhi Plastics Co., Ltd. introduces how to clean the printing plate machine?
Whether it is a basic device such as a printing plate machine, or other advanced equipment, such as a color Doppler imager, a C-arm X-ray machine, a medical film printer, etc., daily maintenance has a distinction between conventional methods and professional methods. .
The conventional method of treating the crystallization inside the processor is to rinse with dilute hydrochloric acid. The advantage of this method is that the operation is simple and the descaling effect is thorough; but the disadvantage is also very obvious, one hydrochloric acid odor is stimulated, and the second hydrochloric acid is a strong acid, which is easy to cause corrosion to the equipment.
Seeing the conventional method in this way is actually too scientific, so we are gradually deprecating, and we recommend that customers use more professional maintenance methods, with special cleaning agents. The concentrate is diluted with water, heated to 30 ° C in a developing machine tank, and turned on for 30 minutes to clean the surface of the rubber roller in the plate processor, crystallize the inner wall of the tank, and not corrosive.
Others include advanced equipment such as color Doppler imager, C-arm X-ray machine, medical film printer, etc. The manufacturer is actively guiding customers to adopt new methods for maintenance, helping to extend equipment life and reduce customer cost. It also laid a good foundation for the next cooperation between the two sides.
Expansion Bolt
An expansion bolt, also known as an expansion anchor, is a type of fastener used to secure objects to concrete, masonry, or other solid materials. It is designed to create a strong and secure connection by expanding and gripping the surrounding material.
Expansion bolts typically consist of a bolt, a sleeve, and a cone-shaped nut or washer. The bolt is inserted into a pre-drilled hole in the material, and the sleeve is placed over the bolt. When the nut or washer is tightened, it pulls the bolt through the sleeve, causing it to expand and exert pressure on the material. This expansion creates a secure grip and prevents the bolt from pulling out.
Expansion bolts are commonly used in construction, particularly for anchoring heavy objects such as machinery, equipment, or structural components to concrete or masonry surfaces. They provide a reliable and durable connection that can withstand high loads and vibrations.
There are different types of expansion bolts available, including wedge anchors, sleeve anchors, and drop-in anchors, each designed for specific applications and load capacities. It is important to choose the appropriate type and size of expansion bolt based on the material and load requirements to ensure a safe and secure installation.
Expansion Bolt,Expansion Bolts For Steel,Stainless Steel Expansion Bolts,Exp Bolt
Taizhou Wanluo Hardware Products Co., Ltd. , https://www.wlhardware.com
