This is a favorite of the Romanian design firm In situ. The special feature of this case is that its bedroom is not willing to simply put a bed, but hang it up.. .... The area is between 30 ~ 50 m2, 4 to 5 meters high, with a sandwich in the middle, forming a double structure of the upper and lower double layers.
The space on the second floor is only enough to put a bed, one side is a rotating staircase, and the other side is fitted with a very low black metal rod. A protective net is laid from the wall to the middle of the railing, which is equivalent to hanging on both sides. . In addition, they also embedded a piece of glass on the floor directly opposite the bed, which can completely see the downstairs and strengthen the feeling of hanging.
Elsewhere in the room, a variety of wooden cabinets were placed, and small objects were placed to make the room interesting. The second floor of the loft is usually the bedroom, because of the height of the floor, there is also a lot of space for the downstairs. This kind of design makes the space on the first floor clean and tidy. It is definitely the best for young people today.
Minette furniture news information for you to report, more information please pay attention to Minette furniture
LED Sensor Batten Lights has options of microwave sensor and infrared sensor. There are two sensing modes. One is 0-10v dimming, and the other is on/off.
The main difference between these two modes is that the 0-10v dimming mode can set the brightness of the light after the person walks, and the pending time of this brightness can also be set. On/off mode, you can only set the time for the lights to turn off after a person walks, but not the brightness (that is, functions 3, 4 cannot be implemented). The 0-10v dimming mode is more intelligent.
Briefly introduce the function of sensor light:
1. Set up daylight threshold: If the ambient light is higher than the set brightness, the sensing function will not be triggered.
2. Set up the hold time: The time for the light to maintain brightness after the person walks away.
3. Set up a stand-by dim level: set the brightness maintained after the person walks
4. Set up stand-by time: After the person walks, the time to maintain low brightness
5. Set up detection area: Set the detection area.
Toggle button can set the remote distance of remote control and sensor.
If you need sensor lights in factories or warehouses, corridors, or other indoors, you can choose this LED Sensor batten lights. If you need IP66 sensor light, you can choose Sensor Waterproof Light.
Motion Sensor Led Light,Sensor Led Light,Motion Sensor with Led Light,Led Light Motion Sensor
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com