Broken bridge heat insulation aluminum alloy window is our common decoration material, and it is also widely used in life. The broken bridge insulated aluminum alloy window is light in weight and easy to install, so it is a choice for many consumers. Then the price of heat-insulating aluminum alloy windows for broken bridges is clear to everyone? The prices of broken aluminum alloy windows in broken bridges on the market are different. The following Xiao Bian and everyone introduced the related knowledge of broken aluminum alloy windows. Friends in need can find out.
Broken Bridge Insulated Aluminum Alloy Windows
Broken-bridge heat-insulating aluminum alloy window prices are still a lot of different, see the price of surface treatment baking paint is about 50 yuan per square meter, and powder coating price is about 200 yuan per square. Look at the unit area and the amount of aluminum with the thickness of the section is not the same, the price is not the same. The cross section of 1.4 and the cross section of 2.0 may differ by more than 100 yuan. A good surface treatment will not change color in 10-20 years, and some designs with broken bridge insulation will increase the cost of 300-500 yuan.
Broken Bridge Aluminum Alloy Window Maintenance Method
1. When cleaning broken aluminum alloy windows, many people will directly step on the aluminum frame, resulting in direct deformation of the aluminum frame. Remember that you can't step on the aluminum frame when cleaning, and you can't pull the frame for support.
2. The seal tops and glass glue are all designed to give a better seal to the broken aluminum alloy window, as well as the effect of heat preservation and waterproof. If there is a phenomenon of shedding, repair and replace it in time.
3. When cleaning, you can use a soft cloth dipped in clean water or some neutral detergent to wipe, can not use corrosive, strong acid and alkali cleaning agent.
4. After the heavy rain, there will be traces of residual raindrops on the broken aluminum windows, which must be cleaned in a timely manner, especially with attention to chute water. If the chute is used for a long time, the friction force is increased. Add a little oil or a layer of wax oil.
5, in daily life, should always check the tightening bolts and positioning axis, wind bracing, floor springs and so on. Damaged parts are found and replaced in time. Aluminum alloy doors and windows of the vulnerable parts, to regularly add oil to maintain clean and flexible.
6, in the use of broken bridge aluminum alloy window, you should gently push, push and pull along the way. If you find it difficult to force it, you should eliminate the problem first. Accumulation of dust, deformation is the main reason for the difficulty of sliding aluminum alloy doors and windows, to keep the door frame clean, especially the cleaning of the slot. Vacuum cleaner can be used to suck out the ash in the groove and door seal tops.
7. Always inspect the wall joints of broken aluminum doors and windows frames. If loosened for a long time, it is easy to deform the frame as a whole, so that the doors and windows cannot be closed and sealed. Therefore, loosening of the screws at the joints should be fastened immediately, such as loosening of screw footings, and application of epoxy glue to adjust a small amount of cement.
The above is the prices of broken-bridge insulated aluminum alloy windows and related maintenance skills that Xiaobian brought to everyone. After reading it, is it better to know more about this? Hope that the above can help everyone, if you want to learn more about For related information, please continue to pay attention to this site, more exciting so stay tuned!
Aluminum alloy window balcony aluminum window broken bridge heat insulation aluminum alloy window price
Led Area Light,200W Led Area Light,Led High Area Light,Dlc Area Lights
Fuonce-Lighting , https://www.fuoncelighting.com