Cork flooring is said to be best suited for geothermal floors. Although there are many references to “geothermal floors†on the market, according to experts, this claim is wrong. Here, briefly explain how to choose the floor in a geothermal environment:
First, it should not be thick. The floor heat is transmitted to the ground above the floor, and there will be some loss in the middle. Therefore, the floor suitable for laying in geothermal environment should first minimize the heat loss, and directly affect the heat conduction speed is the thickness of the floor, so the floor should not be thick "In general, solid wood flooring 10~14mm, parquet 15~20mm, and cork flooring only 4mm.
Second, the temperature changes without distortion. In winter, from the cold weather to the urban heating, the indoor temperature will have a relatively large temperature difference, so the adaptation and control of the floor temperature is also very important. The ground heating must consider this aspect, otherwise it will cause the floor Cracking deformation. In general, the structure of the floor is fibrous, such as parquet and laminate flooring. Changes in temperature will result in partial overheating or undershoot, and they will be transmitted along the fibers. If the forces are not uniform, the floor may be easily deformed, while the cork floor After the heat is applied, the heat is disintegrated and the temperature change from minus 60°C to minus 80°C has no effect on him.
Third, formaldehyde emission is low. General floor testing at room temperature, formaldehyde emissions are within the standard range, but in the geothermal environment, the higher the temperature, the higher the formaldehyde release, and the formaldehyde release of cork flooring is detected by the national authorities, room temperature The formaldehyde emission is almost zero. Under the geothermal environment, formaldehyde emission will not exceed the standard.
This shows that cork flooring is indeed the most suitable geothermal floor.
Nature Floor Del Floor Formaldehyde
Previous How to buy paint in autumn and winter
Next Home decoration plate purchase
Silenced a summer flooring industry in the hot day of the National Day Golden Holiday can not wait to stir up, the floor industry for 8mm, 12mm in an industry-wide controversy, triggering more media thinking: "12mm floor is purely commercial hype. "A lot of media broke the news: The 12mm floor is purely a waste of resources. So, for consumers, is 12mm flooring improving the quality of life or is it wasting resources? In the face of the boom in the flooring industry,...
Authoritative statement: Rational paving is more at ease With the current bottleneck in floor innovation and the increasing homogenization of products, consumers should put more effort into paving the floor. There has always been a saying in the flooring industry that wood floors are "seven-packs of three-part floorboards," which means that the quality of the installation determines 70% of the floor quality. The use of the floor is not ideal, but also largely caused by the floor pavement is not in place, the floor paving problem has become a constraint on the use of the floor ...
There are many brands on the floor today, for everyone's safety and physical and mental health. Especially for everyone to find a point to buy the floor of the skills. 1. Eyes to see - to observe whether the density of the substrate is high density, medium density, low density; whether the color is normal white, whether the wood surface particles are fine and smooth, the wood surface particles are fine as the gray surface is the same as the washed substrate. , Structure, density are far less than the density of Jiangxi Fuzhou Daya substrate density; wood grain is realistic: good quality flooring is usually ...
Of course, the lower the formaldehyde content, the better. No better. However, in order to reduce the formaldehyde content on the basis of the original equipment, only one method is to reduce the amount of glue, so some manufacturers in the second test report only detected the formaldehyde content, but did not detect the water swelling rate, the static bending strength of these items . The formaldehyde content of the imported laminate flooring is around 0.1, and the packing box is marked with the E1 standard, not E0. Imported laminate flooring substrate than domestic brands ...
Misunderstanding of a European standard E1 is equal to the national standard E1 European E1 standard The European standard EN13329 uses a perforated extraction method. Perforation extraction method: The laminated wood flooring tested was 10g absolute dry board, which was chemically/physically extracted; the content of E1 ≤ 9mg/100g was directly measured. National E1 standard At present, China's formaldehyde index of laminate flooring is implemented in GB18580-2001. The E1 indicator uses the dryer method.
submit
Soft Close D Shape Toilet Seat
A D-shaped Toilet Seat is a specially designed toilet seat that is usually used in conjunction with a D-shaped toilet.The design of the D-shaped toilet seat has been optimised from the traditional toilet seat to better fit the shape of a D-shaped toilet, thus providing a better user experience.
One of the advantages of the D-shaped toilet seat is its larger coverage area, which helps provide better privacy and comfort. In addition, some high-end D-shaped toilet covers are equipped with smart features such as automatic deodorisation, dual-airway drying and automatic flushing, which further enhance ease of use and comfort.
In terms of material, D-shaped toilet seat can be made of a variety of materials, including urea-formaldehyde material and density board material. Each of these materials has its own characteristics, with urea-formaldehyde material being hard and resistant to wear and tear, while density board material has a smooth surface and is easy to process. Consumers can choose the right material according to their needs and budget.
It should be noted that, because the shape and size of the D-type toilet seat is more special, so when you buy it, you need to make sure that it matches perfectly with the D-type toilet at home.
Overall, the D-shaped toilet seat is a design that combines comfort and practicality, and is suitable for families with high demands on quality of life. When making a choice, consumers should make comprehensive considerations in conjunction with their needs and usage environment in order to select the most suitable product for them.
Soft Close D Shape Toilet Seat,D Shape Toilet Seat,Comfortable Toilet Seat,Quick Release Toilet Lid
Yangzhou Mifen Import and Export Co., Ltd , https://www.fanmitrkwc.com