Polystyrene Foam EPS Sandwich Panel for Partition Wall/Roofing Insulation Board

Model NO.: ZJT-057
Advantage: Eco-Friendly, Waterproof and Fireproof etc
Anti-Earthquake: 8-13 Grade
Use Life: >70 Years
Sound Insulation: >45 Db
Anti-Wind: 13 Degree
Compressive Strength: >3.5 MPa
Hanging Force: >1000 N
Sample Available: Yes
Trademark: ZJT
Transport Package: Pallet+Pearl Wool+Corner Paper+Belt+Plastic Film
Specification: ISO, CE, SGS
Origin: Fujian, China
HS Code: 6810999000

Polystyrene Foam EPS Sandwich Panel for partition Wall/Roofing insulation board


1 ZJT Sandwich Panel Type
-- With EPS grain
--With Ceramsite

2 ZJT Sandwich Panel Composition
Face: Calcium Silicate Board
Core: Cement+EPS Polystyrene Foam+Sand

3 ZJT Sandwich Panel Specifications

Length: 2270/2440/2700/3000mm
Thickness: 50/60/75/90/120/150/180/200mm
Width: 610mm


4 ZJT Sandwich Panel Advantages

1) Heat insulation and Preservation The major material is polystyrene grains and other anti-freezing and heat preserving environmental protection materials, which could adjust the indoor temperature at a constant range thus achieving the effects of ecological adjustment.

2) Waterproof and Fireproof The face panel of energy-saving boards on both side are 5mm calcium silicate fireproof board and the main materials is a mixture of cement, sand, fly ash etc.

3) Sound insulation and Absorption The inside construction material (EPS polystyrene grain) functions well in sound insulation and sound-absorbing.

4) Easy construction and Time Saving For the same construction work that takes 12 people and 60 minuses to complete with traditional blocks, only 3 people and 60 minutes will do with boards, thus can save a lot of labor and time cost for the construction part.

5) High intensity and Quake Proof The energy saving boards are all with high intensity and the earthquake resistance can reach 8.5 magnitudes.

6) Space and Cost Saving For its thickness and lightweight features, the building area is largely increased and saves the cost construction structure a lot.

Polystyrene Foam EPS Sandwich Panel for Partition Wall/Roofing Insulation Board




5 ZJT Sandwich Panel Application

Floor System
ZJT light weight compound sandwich panel can be innovatively used as floor board. This system has the outstanding advantages such as hight load-bearing capacity, anti-static electricity, friction resistance, high strength, convenient for wire groove and water pipe inbuilt, corrosion resistance, no deformation, no split, etc., which is much suitable for the fields including the floor plate of additional top floor, factory, workshop, warehouse, etc.

Villa&Exterior Wall System
Light weight compound sandwich panel can automatically adjust indoor air and water content with the season and climate changes, and such ecology effect just goes with the tide of modern residential building.

Interior Partition System
Light weight compound sandwich board have been widely applying to the special positions like partition panel of high-rise and mega-high-rise buildings.

Roof System
Light weight compound sandwich panel roof system brings brand-new added value and application idea to the traditional roof construction. Its easy construction time, which bring out its hight integrated performance.

Polystyrene Foam EPS Sandwich Panel for Partition Wall/Roofing Insulation Board




Technical Data

 
Item Parameter Index Specifications  
60mm 75mm 90mm 100mm 120mm 150mm 180mm
1 Anti-impact capacity/times ≥5 ≥5 ≥5 ≥5 ≥5 ≥5 ≥5
2 Anti-bending damage load/times over deadweight ≥3.0 ≥3.0 ≥3.0 ≥3.0 ≥5.0 ≥5.0 ≥7.0
3 Compressive strength/Mpa ≥3.5 ≥3.5 ≥3.5 ≥3.5 ≥3.5 ≥3.5 ≥3.5
4 Softening coefficient ≥0.8 ≥0.8 ≥0.8 ≥0.8 ≥0.8 ≥0.8 ≥0.8
5 Surface density(kg/m2) ≤70 ≤70 ≤90 ≤90 ≤110 ≤110 ≤130
6 Moisture rate(%) ≤10 ≤10 ≤10 ≤10 ≤8 ≤8 ≤8
7 Dring shrinkage value(mm/m) ≤0.5 ≤0.5 ≤0.5 ≤0.5 ≤0.5 ≤0.5 ≤0.5
8 Hang force(N) ≥1000 ≥1000 ≥1000 ≥1000 ≥1000 ≥1000 ≥1000
9 Sound insulation capacity in the air(dB) ≥35 ≥35 ≥40 ≥40 ≥45 ≥50 ≥55
10 Fire endurance(h) ≥1.5 ≥1.5 ≥2.5 ≥2.5 ≥3.0 ≥4.5 ≥6.0
11 Heat transfer coefficient(w/m2.k) ≤2.0 ≤2.0 ≤2.0 ≤2.0 ≤2.0 ≤2.0 ≤2.0
12 Inner radiation index ≤1  ≤1  ≤1  ≤1  ≤1  ≤1  ≤1 
13 Outer radiation index ≤1  ≤1  ≤1  ≤1  ≤1  ≤1  ≤1 
14 Frost resistance(shall show no visible cracks and surface without change) _ _ shall show no visible cracks and surface without change
15 The combustion properties(A1 or A2) _ _ A1 or A2

The Installation Process:

  1. Set line:set line and carry panel in position.
  2. Saw panel:use hand-hold eletrict saw to cut freely.
  3. Sizing:sizing cement on tenon side of two panels then spread ploymer mortar on one tenon.
  4. Installation:carry panel prepared to be installed panel.
  5. Plant bar in wall and pillar:dry one hold in the original pillar or wall and fix panel by one steel bar.
  6. Corret and fix:use one guiding ruler to check and level correction.
  7. Plant bar in structure beam:drill one hole in structure beam and plant one reversed 7 type shaped steel bar to fix with wall panel.
  8. Plant bar in floor:dirll one hole in floor and panlt 7 types shaped steel bar to fix with wall panel.
  9. Plant bar between wall panel:plant one 200mm length steel bar in the angle or 45 degree to fix between two panels.
  10. Install electric wire and switch:set lines on the place required to be settled with concealed wire and switch box.
  11. Grout and fill slurry:fill and handle corrected wall panel with ploymer mortar.
  12. Scrapping ash and sticking anti-crack cloth,coating:stick anti-crack cloth and brush coating after grouting slurry.
Polystyrene Foam EPS Sandwich Panel for Partition Wall/Roofing Insulation Board


6 ZJT Sandwich Panel Packing
1)Free packing, normal pallet + packing belt
2)Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
3)Loading: Normally 18 pallets per 20' container or according to clients' requirements

Polystyrene Foam EPS Sandwich Panel for Partition Wall/Roofing Insulation Board

7 About us
Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. We can produce more than 2 million square meters of various wall materials annually.

8 Contact Us
Dear friend, if any problem pls feel free to contact us, mail me or call +86-592-5216902, thank you very much.
Contact Person:  Zoe Zeng
Mobile Phone:  +8618559217326

Alloy is a material with two metals, more metals or nonmetals that have been synthesized by a certain method of metal. According to the number of elements, it can be divided into two-element alloy, three element alloy and multi alloy.


BT Alloy Co.,Ltd. was founded in 2005 with a strong financial foundation, a sound system ofpersonnel and system management. The company is located in 205 Century Road,Dawukou Area, Shizuishan,Ningxia Province, China, and mainly produceand sale related Ta, Nb, Be and Graphite, Al products, semi-finished products. Afteryears of development, the company has two factories, which covers an area ofmore than 40000 square meters, with professional facilities and personnel.

Companiesadhering to the scientific management of modern enterprises, the production ofprecision, forge ahead, pioneering and innovative, rapid rise to the strengthenterprises in the local market. BT Alloy firmly believe that there is nomarket for the enterprise, only have enterprises that cannot find market. Thequality of the product and the company's integrity has been established as theprimary task. Over the years, BT Alloy spent lots of capital on the productdevelopment, and now has a mature technology and ability to provide highquality products for our customers.



Alloy

Ta Alloy,Nb Alloy,Be Alloy,Al Alloy

SHIZUISHAN BT ALLOY CO.,LTD , http://www.szsbthj.com