Double star machine developed a spherical turning tool holder device

The workshop of the processing platform of Double Star Machinery Corporation has successfully developed a spherical turning tool holder device, which realizes the precision machining of spherical workpieces on ordinary lathes.

In the past, when machining a spherical workpiece on a common lathe, the turning tool was clamped on the lathe tool holder, and then the two handles were simultaneously shaken by hand to perform vertical and horizontal feeding to realize the processing of the spherical workpiece. This original processing method has many drawbacks: the manual vertical and horizontal feed speed is difficult to control, and the roundness of the workpiece is unqualified; the labor intensity of the employee is relatively large; the processing efficiency is very low. To this end, the company's lathe worker Niu Tonglun has successfully produced a set of "spherical turning tool holder device" through the waste head through multiple innovations, and the ball can be precisely processed by shaking the handle evenly with the right hand. The device can greatly improve the roundness and surface roughness of the sphere, and the pass rate reaches 100%. At the same time, the labor intensity of employees has also been reduced by 50%, the work efficiency has increased by 30%, and the cost per item has been reduced by 40%.

Inner Tube and Rubber Wheel

Inner Tube and Rubber Wheel, Inner Tube for Wheelbarrow, Inner Tube

China National Huachen Energy Group Co., Ltd. , http://www.chc-chem.com