Nowadays, it is the decoration period of “Golden September and Silver 10â€. Presumably, many owners are busy going to the store to pick up the products. However, there are many kinds of wooden doors on the market, so let’s spread the knowledge and let it go.
First, paint: (paint door is divided into two categories, clear oil and mixed oil)
1) Clear oil: There are two kinds of lacquer, one is fully enclosed paint, the surface of the fully enclosed paint is flat and bright, and the paint surface is full and smooth when touched by hand, and the texture of the wood grain itself is not felt. The other is called semi-closed paint. This paint is the opposite of the fully enclosed paint. From the visual point of view, its wood grain effect is outstanding, the texture is strong, the wood grain feels real, and the surface will be bumped with the change of wood grain when touched by hand. Not flat.
2) Mixed oil: According to different requirements, spray paint with different colors, the surface is smooth, there is no wooden effect, and the paint color is dominant.
The surface of the paint door is smooth and bright. When selecting, pay attention to whether the paint looks full, the color is even, and the saturation is good. When touching the paint surface with your hand, you can use the nail to lightly paint the paint on the hidden part of the door to test the hardness of the paint film. It is anti-wear and scratch-resistant. A good scratch of the paint film will not scratch.
Second, paint free:
1) Paint paper: The decorative paper printed with wood grain is painted and glued to the door. This type of door has many kinds of colors, clear lines, strong decoration, and low manufacturing cost. However, due to the limitation of the material itself, the wear resistance is poor, the life is low, cracking, discoloration and aging are easy.
2) PVC: It belongs to plastic decorative film and is glued to the door. This kind of door is simple to make, the texture of the color is clear, the cost is slightly higher than the paint paper, and the choice of color and pattern is large. However, the wear-resistant flame retardant is relatively poor, and it is easy to crack, discolor, and age.
3) Fireproof board: Micro-type fireproof board, which is formed by high temperature and high pressure of machine. This kind of facade has good strength, anti-wear, strong flame retardant, anti-ultraviolet, non-discoloration, aging, and very easy to clean and care. It is a door that is easy to be contaminated with oil stains and stains in kitchens, toilets, etc. It can be cleaned with a brush or iron shavings used in various household cleaning agents, without causing any damage to the surface of the door, and is an environmentally friendly material. However, due to the special nature of the material, there are certain restrictions on the door type, and the selection space of the door type is relatively small.
4) Vacuum blister: The MDF mills the molding line of the door, sprays the glue and puts it on the vacuum blister machine, adsorbs the plastic PVC film, and then has the wood grain pattern and shape. The surface properties of such doors are similar.
When choosing a paint-free door, the focus should be on the surface texture and the shape of the door and the meticulous workmanship. Then the price of the door meets your purchasing needs. However, in addition to the above points when purchasing the door of the fire plate veneer, the most important thing to focus on is the strength of the door decoration surface. The strength of the fire board finish is very good. If you use the nail to test it, then it will not It will cause any harm to it. Generally, this kind of door can be tested with the keys, pens and other items that are often around you. If you don't use sharp instruments to test, the good fireproof board finish will not have any scars.
ASTM A36/A283-C/A516 grade55,60,65/ A572 Gr 50/60/70 high strength Steel Plate
Type
Hot Rolled Steel Plate/Mild steel plate/black steel plate/Carbon steel plate/sheet
Standard
ASTM A20/A20M, ASTM A36/A36M, JIS G3115,DIN 17100,EN 10028
Material
A36,A106Gr.B,Q235,Q345,Q195,ST37-2,ST52-3,A516-Gr.55/Gr60/Gr65,Gr70,A204,A378-Gr.2/Gr.12/Gr22,13CrMo44,10CrMo910,15Mo3,A515 Cr.60/Cr55/Cr65,4140,4130 etc
Dimension
Thickness: 0.4mm-280mm as customer's requirement
Width: 1000mm,1219mm,1250mm,1500mm,1800mm,2000mm,2200mm,2500mm,3000mm,
as customer's requirement
Length:2000mm,2438mm,3000mm,6000mm,as customer's requirement
Surface
Clean, blasting and painting according to customer requirement
Application
It is widely used in Building Construction,Bridge,Architecture,Vehicles Components,
hipping,High pressure container,Boiler,Large Structure steel etc
Iron Plate, Rolled Steel Plate, Cold Carbon Rolled Steel Plate, Galvanized Iron Sheet
Hebei Dongshengyuan Trading Co.,Ltd. , http://www.wiremeshdsy.com