High Anti-Corrosion Epoxy Powder Coating

Due to monitor settings, monitor pixel definitions, limitations of desktop scanners, digital photography, and dye lot variations, we cannot guarantee that the color you see on your screen as an exact color of the product. We strive to make our colors as accurate as possible, but screen images are intended as a guide only and should not be regarded as absolutely correct. All colors are approximations of actual colors.

Introduction: 

The raw materials of Powder coating are resins, pigments, fillers, harderner ect. Compared with lyquid paint, powder coating is environmental friendly and can reduce costs. Powder coating can form a harder finish than conventional paint and can be applied more efficient.  While it also has disadvantages, it is not good for large amd heat-sensitive objects. Usually the thickness of film by powder coating is >30 μm.

 

Technic Data: 

• Specific gravity: 1.25-1.75 ( depend on colors)
• Particle size distribution(Laser Particle size analyser): Less than 5% above 100μm;50-65% above 32 μm
• Average particle size:35-45 μm
• Curing Schedule: 200°C 10minutes
• Optimal film thickness: 60-80μm
• 8-12 square meters/kg, thickness 60μm(100% of utilization rate)

The data above is rough and for reference only, please contact me for more accurate data when you have clear demands.
 

Purchase Note: 

 

1.M.O.Q :  

The minimum order is 500kg ,each color ≥ 100kg

 

2.Colors:  

RAL color :we usually use RAL colors that is widely used in paint industry and easily find in market

Custom color : Color matching is available , if you have colors model ,please send to us for matching .

 

3.Prices: 

Prices depend on the colors and using environment ,for prices please tell us the colors and using environment (indoor use or outdoor use).

 

4.Time of delivery :

Production will take about 5-8 days after receipt of prepayment,this is subject to the quantity .

 

5.Payment :

30% T/T prepayment , 70% T/T before shipment (or against BL)  or LC at sight .

 

6.Samples:

1kg powder sample is available for each color for your testing.
Sample is free of cost,but  if you pay for the air freight we will highly appreciate.
Contact Us:
NANJING POWDER NEW MATERIAL CO.,LTD
Mb:13851928678
Tel:0086-25-52111679 Fax:0086-25-52111679
www.powder-coating.com.cn
www.prd.en.alibaba.com

 

 

Due to monitor settings, monitor pixel definitions, limitations of desktop scanners, digital photography, and dye lot variations, we cannot guarantee that the color you see on your screen as an exact color of the product. We strive to make our colors as accurate as possible, but screen images are intended as a guide only and should not be regarded as absolutely correct. All colors are approximations of actual colors.

Introduction: 

The raw materials of Powder coating are resins, pigments, fillers, harderner ect. Compared with lyquid paint, powder coating is environmental friendly and can reduce costs. Powder coating can form a harder finish than conventional paint and can be applied more efficient.  While it also has disadvantages, it is not good for large amd heat-sensitive objects. Usually the thickness of film by powder coating is >30 μm.

 

Technic Data: 

• Specific gravity: 1.25-1.75 ( depend on colors)
• Particle size distribution(Laser Particle size analyser): Less than 5% above 100μm;50-65% above 32 μm
• Average particle size:35-45 μm
• Curing Schedule: 200°C 10minutes
• Optimal film thickness: 60-80μm
• 8-12 square meters/kg, thickness 60μm(100% of utilization rate)

The data above is rough and for reference only, please contact me for more accurate data when you have clear demands.
 

Purchase Note: 

 

1.M.O.Q :  

The minimum order is 500kg ,each color ≥ 100kg

 

2.Colors:  

RAL color :we usually use RAL colors that is widely used in paint industry and easily find in market

Custom color : Color matching is available , if you have colors model ,please send to us for matching .

 

3.Prices: 

Prices depend on the colors and using environment ,for prices please tell us the colors and using environment (indoor use or outdoor use).

 

4.Time of delivery :

Production will take about 5-8 days after receipt of prepayment,this is subject to the quantity .

 

5.Payment :

30% T/T prepayment , 70% T/T before shipment (or against BL)  or LC at sight .

 

6.Samples:

1kg powder sample is available for each color for your testing.
Sample is free of cost,but  if you pay for the air freight we will highly appreciate.
Contact Us:
NANJING POWDER NEW MATERIAL CO.,LTD
Mb:13851928678
Tel:0086-25-52111679 Fax:0086-25-52111679
www.powder-coating.com.cn
www.prd.en.alibaba.com

 

 

DIN Standard Hex Nuts

Din En Iso 4032 Nuts,Din 935 M64 Hex Slotted Nut,Din 935 Castle Nut,Din934 Grade 2H Hex Nut

Ningbo Mingli Fasteners Co., Ltd. , https://www.nbmlf.com