Highly Anti Corrosion Epoxy Powder Coating for Pipeline

highly anti corrosion epoxy powder coating for pipeline

Lean pipe / composite tube, also known as wire rods, steel composite pipe or flexible tube, is made of carbon steel. from high quality steel to surface treatment, coated with plastic resin welded steel pipe, the outer surface of the plastic layer using special thermo plastic adhesive, coating the inner surface of cover combination. To prevent separation of the coating and the pipe between them using a special adhesive bonding. Composition of products, with good looks, wear, bright color, rust no pollution, is an ideal alternative to stainless steel products. Standard quasi-linear rod material diameter 28mm, pipe wall thickness 1.0mm. The appearance of color can make different effects according to different requirements.

Our Workshop:


Equipment used:
Electrostatic gun

 

AVERAGE COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg or 25kg net weight.
 

COLORS AVAILABLE

• RAL colors coating powder
• Pantone colors
• Color-matching regarding customer requirement is available

GENERAL TYPES

• Polyester /Hybrid powder coating
• Epoxy Powder coating color
• Metallic powder coating color
• Hammer tone color powder coating
• Texture color powder coating powder

Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.
 

PHYSICAL PROPERTIES

• Specific gravity :1.2 ~ 1.8g/cm3 up to colors
• Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
• Level of liquidity:24 ~ 27 mm
•  

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes
 

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
 

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
We offer free samples to you.

You can contact me informatoin as follows,
Attn:Danae

highly anti corrosion epoxy powder coating for pipeline

Lean pipe / composite tube, also known as wire rods, steel composite pipe or flexible tube, is made of carbon steel. from high quality steel to surface treatment, coated with plastic resin welded steel pipe, the outer surface of the plastic layer using special thermo plastic adhesive, coating the inner surface of cover combination. To prevent separation of the coating and the pipe between them using a special adhesive bonding. Composition of products, with good looks, wear, bright color, rust no pollution, is an ideal alternative to stainless steel products. Standard quasi-linear rod material diameter 28mm, pipe wall thickness 1.0mm. The appearance of color can make different effects according to different requirements.

Our Workshop:


Equipment used:
Electrostatic gun

 

AVERAGE COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg or 25kg net weight.
 

COLORS AVAILABLE

• RAL colors coating powder
• Pantone colors
• Color-matching regarding customer requirement is available

GENERAL TYPES

• Polyester /Hybrid powder coating
• Epoxy Powder coating color
• Metallic powder coating color
• Hammer tone color powder coating
• Texture color powder coating powder

Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.
 

PHYSICAL PROPERTIES

• Specific gravity :1.2 ~ 1.8g/cm3 up to colors
• Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
• Level of liquidity:24 ~ 27 mm
•  

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes
 

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
 

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
We offer free samples to you.

You can contact me informatoin as follows,
Attn:Danae

Illuminated Signage

Often used for both interior and exterior illuminated acrylic signs, these illuminated neon signage include everything your business might need from logo, products, open time, home & festival decoration, lighting and advertisement.

Safe & low voltage, low power consumption, because the light source is LED, so even in the case of 12V, it can work normally.

Illuminated Signage,Illuminated Acrylic Signs,Outdoor Led Illuminated Signs,Illuminated Signage Letters

Shenzhen Oleda Technology Co.,Ltd , https://www.baiyangsign.com