ASTM 400 Monel Seamless Alloy Steel Pipe

Model NO.: 400 monel
Trademark: hexion
Transport Package: Carton
Specification: customized
Origin: Taizhou
HS Code: 75071200

Introduction

N04400 Monel 400 Nickel Alloy Pipe is a Nickel-Copper alloy with high strength and excellent corrosion resistance in a range of acidic and alkaline environments and especially suitable for reducing conditions. It also has good ductility and thermal conductivity.

 

Chemical Composition of N04400 Monel 400 Nickel Alloy Pipe

The compositional range for N04400 Monel 400 Nickel Alloy Pipe is provided in the table below.

Element

Content

Ni
63 % min
 

Cu

28 - 34 %

Fe

2.5 % max

Mn

2 % max

 

Typical Properties of N04400 Monel 400 Nickel Alloy Pipe

Typical properties of  N04400 Monel 400 Nickel Alloy Pipe are covered in the following table.

Property

Metric

Imperial

Density

8.8 g/cm3

0.318lb/in3

Melting point

1350°C

2460°F

Co-Efficient of Expansion

13.9µm/m.°C
(20-100°C)

7.7x10-6 in/in.°F
(70-212°F)

Modulus of rigidity

65.3 kN/mm2 9471 ksi

Modulus of elasticity

105-120 kN/mm2

15230-17405 ksi

 

Properties of Supplied Materials and Heat Treated Materials

Condition of Supply

Heat Treatment (After Forming)

Annealed/Spring Temper

Stress relieve at 300-320°C (570-610°F) for 1 hour and air cool.

Condition

Approx Tensile Strength

Approx Service Temp.

Annealed

400 - 600 N/mm2

58 - 87 ksi

-200 to +230°C

-330 to +445°F

Spring Temper

850 - 1050 N/mm2

123 - 152 ksi

-200 to +230°C

-330 to +445°F

 

Relevant Standards

N04400 Monel 400 Nickel Alloy Pipe is covered by the following standard:

  • BS 3075
  • 3076 NA 13
  • DTD 204B
  • ASTM B164

 

Equivalent Materials

Equivalent materials to  N04400 Monel 400 Nickel Alloy Pipe are:

  • W.NR 2.4360
  • W.NR 2.4361
  • UNS N04400
  • AWS 040

 

Applications of  N04400 Monel 400 Nickel Alloy Pipe

N04400 Monel 400 Nickel Alloy Pipe typically finds application in:

  • Marine Engineering
  • Chemical Processing
  • Hydro-carbon Processing
  • Heat Exchangers
  • Valves
  • Pumps

Constant Current LED Strip

With a constant current of IC, the working voltage of the IC is 12-24V. As long as the voltage is not lower than the rated voltage, the current of each led beacon will be consistent.It is made of high-brightness LED (LED is made of imported chip---high brightness, good electrical).

No pressure drop can be achieved over a specific length and voltage.Suitable for urban lighting projects,home decoration, bars, dance halls, cars, indoor/outdoor advertising and interior and exterior contours of various high-end venues

Constant Current LED Strip,5050 RGB LED Strip,Constant Current LED Strip Flexible,Bright Constant Current LED Strip

SHEN ZHEN SEL LIGHTING CO.,LTD , https://www.sel-lighting.com