The development of air-conditioning and refrigeration network technology is getting faster and faster. Nowadays, there are more and more types of products, and the use is different. So, what are the cutting machine tools produced by the shearer tool manufacturers?
1. Special shearing machine knife: use with other equipment to complete special purpose 2, multi-purpose shearing machine:
a, combined punching machine knife: can complete the cutting of the board, and can cut the profile, mostly used for the blanking process b, sheet bending and shearing machine: that is, cutting and cutting can be done on the same machine Bend two processes.
3, oblique blade shearing machine knife: the upper and lower blades of the shearing machine are at an angle, generally the blade is inclined, and its inclination angle is generally 1 ° to 6 °. The shearing force of the inclined blade shearing machine is smaller than that of the flat blade shearing machine, so the motor power and the weight of the whole machine are greatly reduced, and the practical application is the most, and the shearing machine manufacturers often produce such shearing machines.
4, flat blade shearing machine tool: good cutting quality, small distortion, but large shear force, energy consumption. More mechanical transmission. The upper and lower blades of the shearing machine are parallel to each other, and are often used for hot-shearing rolling of billets and slabs in rolling mills; and according to the shearing manner, they can be divided into upper cut type and lower cut type.
The shearer tool is mainly used to cut the straight edges of metal sheets of various sizes. It is widely used in various industrial sectors such as airplanes, steel rolling, automobiles, bridges, instruments, boilers, electrical appliances, ships, tractors, and pressure vessels.
Concerned about surprises
Tag: flat blade, hardware tool, shearing machine, initial rolling, slab
Previous: Heat treatment inspection rules for steel castings Next: How to use paint correctly to make the effect more obvious
Blister copper (content of 99% copper) was prepared in advance as a thick plate, pure copper flakes as a cathode, with sulfuric acid (H2SO4) and copper sulfate (CuSO4) mixture as electrolyte. After power is applied, copper dissolves from the anode into copper ions (Cu) and moves to the cathode. Upon reaching the cathode, electrons are obtained and pure copper (also called electrolytic copper) precipitates at the cathode. Blister copper impurities in lively copper and zinc with copper will be dissolved as ions (Zn and Fe). Since these ions are more difficult to precipitate than copper ions, electrolysis can be avoided by appropriately adjusting the potential difference during electrolysis. Than the inactive copper impurities such as gold and silver deposition in the bottom of the cell. The copper plate so produced is called "Pure Copper Sheet (T2)" and of high quality and can be used to make electrical products. Sedimented in the bottom of the cell analogy as "anode mud", which is rich in gold and silver, is a very valuable object, remove and then processed with high economic value.
Pure Copper Sheet (T2)
Pure Copper Sheet,Pure Copper Plate,High Pure Copper Sheet,Pure Cathode Copper Sheet
Ningxia Tongji International Trade Co.,Ltd. , http://www.tongjiinternational.com