Authorities revealed on the 25th that the industry's expectation of the new energy industry revitalization plan may be postponed, and it is expected that it will be at least after the Spring Festival. At present, the latest revised version of the plan has not yet been submitted to the State Council, and it is still being reviewed at the level of the National Development and Reform Commission. The reason is that the development speed of the new energy industry is higher than previously estimated. The relevant departments have to develop the new energy installed capacity in 2020 as proposed in the original draft plan. Adjustments will be made and even individual development goals will be improved.
Earlier, some media reported that the plan had been reported to the State Council as early as the beginning of 2009 and is expected to be promulgated soon. However, authorities have revealed that after the Copenhagen conference, the state has a new understanding of the strategic position of the new energy industry. In addition, the new energy industry has developed rapidly in 2009. At this rate, the development goals of the original new energy industry may be conservative. Therefore, on the basis of the original draft of the plan, this version of the plan has undergone major adjustments, not only on specific indicators, but also some wordings and statements will be revised to adapt to the rapid development of the new energy industry.
According to the original draft of the plan, the total installed capacity of wind power, solar photovoltaic and nuclear power operation in China will reach 150 million kilowatts, 20 million kilowatts and 80 million kilowatts respectively. Compared with the medium and long-term development plan for renewable energy and the medium- and long-term development plan for nuclear power issued in 2007, the development goals of the new energy industry are 5 times, 11 times and 2 times respectively.
Some people in the industry suggest that the target value of wind power and solar photovoltaic power generation can still be raised. The installed capacity of wind power should be increased to 200 million kilowatts. In addition, the demand for the solar photovoltaic industry is very large, with the ability to build on a large scale, the target can be set to 30 million kilowatts.
However, relevant persons of the Renewable Energy Society hold different opinions and believe that although China has already possessed the large-scale construction capability of new energy power generation, due to the high price of new energy power generation, it must be subsidized by the government if the target of new energy installed capacity is set too high. The government's financial subsidies will not keep up, and there is no way to support the development of the new energy industry. The person said: "It is more appropriate to set the target from the perspectives of industry, government, and enterprises. This is why the planning content must be revised and adjusted."
Aluminum Lighting Sheet, a general industry term that describes high-quality Reflective Aluminum that is fabricated to meet specific optical properties for use in various lighting applications. Lighting sheet provides maximum light distribution and helps reduce energy consumption. Reflective aluminum lighting sheet surfaces range in total reflectivity from 84% to 98%, with a variety of finishes available that offer specific optical values:
Lighting sheet is Made from high purity aluminum with a mirror-like surface,mirror finish provides unique photometric qualities to control light. When installed behind a light source, lighting sheet specifically reflects and directs the light, just like a glass mirror. Along with silver, aluminum is the most reflective metal available.
Specular Mirror Lighting Sheet Reflection
Reflection is the change in direction of a wavefront at an interface between two dissimilar media, causing the wavefront to rebound into the medium from which it originated. Common examples include the reflection of light, sound, and water waves. Reflection of light may be specular (i.e., mirror-like) or diffuse (i.e., not retaining the image, only the energy) depending on the nature of the interface.
In a flat mirror, a parallel beam of light changes its direction as a whole, while still remaining parallel; the images formed by a flat mirror are virtual images of the same size as the original object. Reflection of light may be specular (i.e., mirror-like) or diffuse (i.e., retaining only the energy, not the image) depending on the nature of the interface.
In specular reflective aluminum, a beam of light reflects off the surface at an angle of reflection that is equal to its angle of incidence. That is, if the beam of light is shining on the surface at a 30Â° angle from vertical, then it reflects from the point of incidence at a 30Â° angle from vertical in the opposite direction.
Lighting Sheet,Aluminum Light Fixture Reflectors,Light Led Reflector Sheet,Mirror Polished Aluminum Sheet
Changzhou Kema Reflector Material Co., Ltd. , http://www.aluminumreflector.com