    Nowadays, everyone is not very familiar with the use of dicing machines. Its use is even more household name. However, as more and more accidents occur, in order to protect the safety of the staff, some basic matters need to be added before use. Note:    1 . Fasten the feed hopper with the screw at the inlet of the housing;    2 . Check if there is any foreign matter in the casing, and remove the foreign matter in the casing, otherwise the blade may be damaged.    3 . Switch on the water source for use.    4 . When working on the machine, do not put your hands and other foreign objects into the casing to avoid danger.  |
5 , rotating parts and high-voltage power supply , when repairing the equipment , first disconnect and lock the power supply , and visually confirm that the equipment has completely stopped, the dicing machine can remove the cover and the protective plate . 　　 6, when starting the device, the upper hand dicing machine must belt wheel disc, to ensure that no foreign matter, the power supply to start before the slicing apparatus. 　　 7, note that daily cleaning, to prevent excessive accumulation of products, cutting the dicing machine parts, affect cutting efficiency when cleaning can not be used matte material, metal tools, sandpaper and brushes to clean any iron parts, if necessary, with a wooden or plastic tool Spatula . 　　 8. After the dicing machine runs for 4 hours , the equipment must be lubricated . |
    In addition, in the use of the dicing machine, it is also necessary to clean the operating site, check whether the power supply voltage is consistent with the voltage used by the machine, and find a professional electrician to connect the power cord of the machine to the power switch with the full-pole disconnected large open distance, and the grounding mark is reliably connected. Ground wire. For the safety of everyone, the above precautions when using the dicing machine require more attention from our staff.  |
Central Roller Shutter Lock, Normal cut key or Computer key
Single turn, 3 pins Cylinder Lock
Double sided straight , shifted, Lengthened bolt available with 6mm holeInterchangeable: With most common roller shutter locks available on the market. The reinforced bolt makes the roller shutter more resistant to attack.
Available for motorized roller shutter
Reinforced steel bolt: 2mm steel plated folded back on itself to reach overall 6.5mm thickness
Solid brass cylinder with full brass teeth key or computer key.
Rustproof zinc plated box and components
Central Roller Shutter Lock
Central Roller Shutter Lock,Rolling Shutter Lock,Door Cylinder Lock,Roller Shutter Rolling Door Lock
Rayma(SJZ) International Trading Co., Ltd. , http://www.raymalock.com