Glass products are bright and beautiful, and they are one of the building materials that consumers are keen on. So how do you clean the stains on glass products in your life?
1. Glass cleaning six methods:
1 When the wall is painted, the glass window will be glued with lime water. It is difficult to remove these limestone traces and scrub with ordinary water. In this regard, it is easy to remove the lime spots by wiping the glass window with a damp cloth and fine sand.
2 Apply gypsum powder or chalk ash to the glass. Dry it and wipe it with a cloth to make the glass bright and bright.
3The glass is black for a long time. It can be wiped with a fine cloth and toothpaste. It will be as bright as new.
4 After the fresh eggshell is washed with water, a mixed solution of protein and water can be obtained, and the glass or furniture is wiped with it to increase the gloss.
5 When the glass on the window is traced or stained with oil, put a little kerosene or white wine on the wet cloth and gently wipe it. The glass will soon be bright and bright.
6 The glass is stained with paint, and it can be wiped off with a velvet cloth and a little vinegar.
2. Mirror clean three methods
1 small mirror or large cabinet mirror, dressing table mirror and other mirror surface with dirt, can be wiped with a soft cloth (or gauze), put some kerosene or wax, can not be wiped with a damp cloth, otherwise the mirror surface will be blurred, the glass is easy to corrode.
2 Wipe the mirror, frame and keys with a rag of milk to make it clear and bright.
3 When bathing, the mirror in the bathroom is often blurred by steam. The soap can be applied to the mirror surface and then wiped with a dry cloth. A soap film is formed on the mirror surface to prevent the mirror surface from being blurred. If you use astringent lotion, you can also get the same effect.
3. Bonded glass handle
First place the movable glass to the handle, scrub with vinegar, then wash the glass handle with vinegar and dry. Then apply the egg white to the glass and handle, and after pressing and drying, this simple glass handle is very durable.
4. Method of making homemade frosted glass
Take half a basin of water, and a few pieces of iron sand cloth (the number of sand cloth can be determined according to the thickness of the glass), soak it in water for a few minutes, then wash the sand on the sand cloth and gently pour off the water. Place the sand paste on the glass to be ground, take another piece of glass to be pressed and press it on it, and then press it by hand to make a circular grinding. After a few minutes, you can get two pieces of ground frosted glass.
5. Ceramic sheets, pebbles can be cut glass
If you don't have a diamond glass cutter when you cut the glass, you can find a piece of broken ceramic piece, or break the cobblestone, use its sharp corner, use the ruler to force the mark on the glass, and then force the glass to open. This is because ceramics and pebbles are harder than glass.
6. Egg white can adhere to glass
The glass product is broken. You can use the egg white to fill two sections. After the joint is finished, wipe off the egg white that overflows. After half an hour, it can be completely bonded. It can be used after a day or two, even if it is subjected to a large external force. The bond will not break. This method can also be used to bond broken small porcelain.
Ssaw Q235b Steel Pipe,Lsaw Q235b Steel Pipe,Ssaw Q235b Steel Pipe Line
Heavy Steel Pipe Co., Ltd , http://www.hzsteelpipe.com