Model NO.: RTV Series
HS Code: 39100000
Model NO.: RTV Series
HS Code: 39100000
Car tire molding Silicon rubber applicationsCar tire molding Silicon rubber is maily used in Concrete, soap, Toys, ceilings, gift, house decoration, plate engrave, arts & crafts, resin crafts, poly resin crafts, unsaturated resin crafts, candle crafts, plastic crafts, soap crafts, plaster crafts, Buddhist statue crafts cement products, plastic toys, handicrafts, sculpture, reproduction of cultural relic, shoe sole molds, and so on.
Car tire molding Silicon rubber features
Car Tire Molding Silicon Rubber
1. Car Tire Molding Silicon Rubber is suitable for small with the hardness of 26-30 shore A.
2. Car Tire Molding Silicon Rubber is particularly suitable for pouring mold.
Frequently asked questions of Car tire molding Silicon rubber
Why is the appearance of the finished car tire mold striate and unsmooth?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make car tire silicon molds, firstly you should Polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.
| Model | 620# |
| Appearance | white |
| Mixing proportion of curing agent (%) | 4-5% |
| Operating time (mins 25 0 C ) | 30-60 |
| Curing time(hours 25 0 C ) | 4 |
| Hardness (A°) | 20 |
| Density ( g/cm 3 ) | 1.08 |
| Viscosity (mPas - 25 0 C ) | 28000-32000 |
| Tensile-strength(kgf /cm 2 ) | 4.0-4.4 |
| Tear-strength (kgf /cm ) | 22-26 |
| Elongation-break( % ) | 360-400 |
| Retractility( % ) | ≤0.3 |
Car tire molding Silicon rubber applications
Car tire molding Silicon rubber is maily used in Concrete, soap, Toys, ceilings, gift, house decoration, plate engrave, arts & crafts, resin crafts, poly resin crafts, unsaturated resin crafts, candle crafts, plastic crafts, soap crafts, plaster crafts, Buddhist statue crafts cement products, plastic toys, handicrafts, sculpture, reproduction of cultural relic, shoe sole molds, and so on.
Car tire molding Silicon rubber features
Car Tire Molding Silicon Rubber
1. Car Tire Molding Silicon Rubber is suitable for small with the hardness of 26-30 shore A.
2. Car Tire Molding Silicon Rubber is particularly suitable for pouring mold.
Frequently asked questions of Car tire molding Silicon rubber
Why is the appearance of the finished car tire mold striate and unsmooth?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make car tire silicon molds, firstly you should Polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.
| Model | 620# |
| Appearance | white |
| Mixing proportion of curing agent (%) | 4-5% |
| Operating time (mins 25 0 C ) | 30-60 |
| Curing time(hours 25 0 C ) | 4 |
| Hardness (A°) | 20 |
| Density ( g/cm 3 ) | 1.08 |
| Viscosity (mPas - 25 0 C ) | 28000-32000 |
| Tensile-strength(kgf /cm 2 ) | 4.0-4.4 |
| Tear-strength (kgf /cm ) | 22-26 |
| Elongation-break( % ) | 360-400 |
| Retractility( % ) | ≤0.3 |
Smart Glass,Architecture Glass,Switchable Privacy Glass,Smart Automobile Glass
Shenzhen Filmbase Technology Co., Ltd. , https://www.globalfilmbase.com