Corrugated paint spraying precautions


1. The substrate must be thoroughly cleaned and free of any dirt, oil, or debris before painting. Apply a double-layer anti-rust primer, ensuring it is evenly sprayed and allowed to dry completely before applying the corrugated paint.

2. The ideal viscosity for the paint is usually between 35 to 60 seconds when measured with a Ford cup. This ensures proper coverage without excessive dripping or thinning.

3. If the paint is too thin, it may not cover the surface properly, leading to issues like exposed base material, pinholes, or an uneven finish. Always check the consistency before application.

4. The distance between the spray gun and the surface plays a crucial role in the final appearance. If the distance is too far, the spray pattern becomes weak and lacks sufficient coverage. Conversely, if it's too close, the spray can cause heavy buildup and uneven texture.

5. During the first pass, aim to fully cover the substrate. You can maintain a slightly greater distance from the surface and use a lower spray volume to avoid over-spraying. This helps in achieving a more even base coat.

6. For the second coat, wait about 10 minutes after the first one has dried slightly. Increase the paint output slightly and keep the spray gun at a moderate distance. Move the gun smoothly and evenly across the surface for a uniform finish.

7. If you notice any imperfections or oily spots on the base, consider adding one or two drops of an anti-oil agent to the paint mixture. This can help improve adhesion and prevent future defects.

8. Always work in a well-ventilated area and wear appropriate protective gear, such as a mask and gloves, to ensure safety during the painting process.

9. It’s recommended to test the spray technique on a small area first to adjust the settings and get the right balance between coverage and finish.

10. Proper preparation and attention to detail during each step will significantly enhance the durability and visual appeal of the painted surface.

Track Light

LEDER technology's Track light features metal faceted heads that swivel and pivot to direct light where needed and remains cool to the touch when lit. The track light`s base is made using high-quality materials that enable years of utility and durability.

The track light which has classic cylindrical 'can-style' design gets a touch of modern flair with a brushed nickel finish and a slim, contemporary rail. Each light head of this track light is adjustable and easy to adjust, so you can easily brighten up dark corners and dimly lit rooms.

Features:

• Durability design

• Easy to adjust

• Save electricity

• With a rotating lamp cap

• The irradiation direction can be adjusted

• Color temperature :3000k-6000K

• With reliable high performance LED

• Type of protection: IP20

• Warranty:3 - 5 years

Decorative fixed rail cube shaped fixture features reliable high-performance LED. Fits well in applications such as kitchens, retail environments, and anywhere that needs highlighted illumination. The track light is an easy and elegant lighting solution for any room.Except LED Track Light , we also offered other product in Indoor Lighting .Such as : LED Downlight , LED Panel Light, Linear Light ,Wall Light , LED Strip Light , LED Tube Light , Cabinet Light , LED Bulb , LED Ceiling Light as so on .


LED Track Lighting,Track Lighting Lowes,Track Lighting Pendants,Home Depot Track Lighting

LEDER LIGHTING CO.,LTD , https://www.lederlight.com