Furniture maintenance knowledge

Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

In daily life, housewives often clean and maintain their furniture to keep them shiny. But you may not know that some wrong cleaning and maintenance methods, although temporarily making the furniture clean, actually cause potential damage to the furniture. As the use time increases, your furniture will become irreparable. .

●The rag is clean

When cleaning and maintaining furniture, be sure to make sure the rags are clean. After cleaning or wiping off the dust, be sure to turn over or replace it with a clean cloth. Don't be lazy and repeatedly use the dirty side, this will only make the dirt rub repeatedly on the furniture surface, but will damage the bright surface of the furniture.

●Select the right care agent

In order to maintain the original brightness of the furniture, there are currently two kinds of furniture care products: furniture care spray wax and cleaning and maintenance agent. The former is mainly for furniture made of wood, polyester, paint, fireproof rubber sheet, etc., and has two different fresh fragrances of jasmine and lemon. The latter is suitable for all kinds of furniture such as wood, glass, synthetic wood or melamine board, especially suitable for mixed materials. Therefore, if you can use a skin care product that combines cleansing and care, you can save a lot of valuable time.

Before using the wax and cleaning and maintenance agent, it is best to shake it first, then hold the spray can directly at a 45 degree angle, so that the liquid component in the tank can be completely released without losing pressure. Then gently spray the dry rag at a distance of about 15 cm, so that you can wipe the furniture again, which can be very good for cleaning and maintenance. In addition, after using the rag, remember to wash and dry. For furniture with fabric materials, such as fabric sofas and leisure cushions, you can use the cleaning and cleaning agent for cleaning carpets. When using, first use a vacuum cleaner to remove dust, then spray a small amount of carpet cleaner on a damp cloth.

Beware of the four major mistakes

●When wiping furniture, do not use coarse cloth or old clothes that are no longer worn as a rag.

It is best to use a water-absorbent fabric such as a towel, cotton cloth, cotton fabric or flannel to wipe the furniture. Old cloth, such as coarse cloth, wired head, or stitched, buttons, etc., which may cause scratches on the surface of furniture, should be avoided.

●Do not wipe the dust on the furniture surface with a dry rag

Dust is made up of fiber, sand and bauxite. Many people are used to cleaning the surface of furniture with a dry rag. In fact, these fine particles have damaged the furniture finish in the rubbing of the back and forth. Although these scratches are minimal and even invisible to the naked eye, over time, the surface of the furniture will be dull and rough, and the light will not be.

●Do not wash furniture with soapy water, detergent or water

Cleaning products such as soapy water and detergent can not only effectively remove the dust accumulated on the surface of the furniture, nor can remove the sand particles before the light is burned, and because they are corrosive, they will damage the surface of the furniture and make the paint of the furniture The face becomes dull. At the same time, if moisture penetrates into the wood, it will also cause mold or local deformation of the wood, reducing the service life. Nowadays, many furniture are made of fiberboard machine. If there is moisture infiltration, the first two years have not been completely evaporated because the additives such as formaldehyde have not completely evaporated. However, once the additive has evaporated, the moisture of the wet cloth will cause the furniture to become moldy. If the households with lower floors, the furniture at home may have a "mold" every year. I would also like to remind you that even if some furniture surfaces are made of piano paint, it can be properly scrubbed with water. Do not leave the wet cloth on the surface of the furniture for a long time to prevent moisture from penetrating into the wood.

●Furniture care spray wax can not be used to clean and maintain the leather sofa

Many furniture care spray wax instructions can be used to maintain leather sofas, causing many housewives to make mistakes. The salesperson in the furniture store knows that the furniture care spray can only be used to spray the surface of wooden furniture and cannot be sprayed on the sofa. This is because the leather sofa is actually the skin of the animal. Once the wax is sprayed on it, the pores of the leather product will be blocked. Over time, the leather will age and shorten its service life. In addition, some people in order to make the furniture look more shiny, some wax products are directly applied to the furniture, or improper use, but will make the furniture surface have foggy spots.

This type is widely applied for asphalt shingle roof.It highlights the easy and fast installation with solar roof flashing group.SunRack roof flashing is water tight and durable and compatible. This installation can easily accomplished with wood or using the RPS aluminum mounts. As with anything mounted on your roof, make sure to ground the panels well and attach in a secure and watertight manner.


The Tile Replacement Mount provides a fast and easy way to install solar on tile roofs while protecting against water intrusion. Simply remove the tile and replace it with the Tile Replacement Mount. Works with all standard curved and flat tile roofs, and all standard rail-based racking systems. Flashed at both the deck and top levels, the Tile Replacement Mount is fully engineered to meet code requirements and industry best practices. The Tile Replacement Mount features our patented Elevated Water Seal technology for optimal waterproofing. Base mount sold separately from flashing and post.
Tile Roof Mounting Features
1.Versatile: Works with Flat, S-shaped and W-shaped tiles
2.Flexible: Works with all standard rail-based racking systems
3.Simple and clean: No time-consuming, messy tile grinding or cutting
4.Flashings pre-treated and ready for paint, if desired

Our Composition Shingle Roof has been installed on pitched roofs and flat roofs, and is available in clear or black finish. With only one tool required, our composition shingle roof mount is a quick installation. With the flashing and sealing washers, you can be sure of a water-tight seal to protect your roof.


Solar Mounting Brackets For Pitched Roof

Solar Mounting Brackets,Metal Roof Solar Mounting Systems,Solar Panel Roof Mounting Systems,Solar Panels Mounting Brackets

Hebei Honde Plastic & Metal Co., Ltd. , http://www.foundation-system.com