Furniture is like a person, people need health to live long-term moisture, furniture also needs "health" - maintenance, in order to survive the vicissitudes of life and still style. Faced with natural factors such as sunlight, air, seasonal changes, and human factors such as moving, placing, transporting, cleaning, dusting, etc., even a slight negligence and carelessness can cause fatal injuries to furniture. Let's start with seven aspects, specifically talk about the concept, methods and taboos of furniture maintenance.
Maintenance method 1: Compliance with wood
People's health pays attention to human nature, and the maintenance of furniture should also conform to the wood, that is, the "temper" of furniture: some families in the winter drive the heating, people are very comfortable from the heating, but the furniture is far away from the heating, so as not to be affected by the temperature. Too high causes the wood to shrink excessively, causing cracking.
Summer is coming, it often rains, furniture should be placed in the window, so as not to get wet in the rainy weather, damage the surface, damage the cockroach. Many furniture are also afraid of the wind, especially the furniture with furniture such as tables and cabinets. Due to the influence of “dry shrinkage and swellingâ€, it is easy to crack and warp when blowing at the tuyere.
The temper of furniture is "diligent and easy to disperse, long and quiet and easy to decay", collectors must vote for their good, conform to the wood, in order to let the exquisite ancient furniture spread for a long time.
Maintenance Method 2: How to maintain the desktop
There is a saying that is good: "The cold table can't make hot tea." This sentence can be said to conform to the wood, because the ambient temperature of the stored furniture can not be suddenly cooled. For example, furniture with stone surfaces (such as tables, screens, etc.) should not be placed outdoors in the winter, nor in the summer in the sun to avoid cracking.
The oil on the table can be wiped with alcohol. If there is no alcohol, it can be wiped with high-alcohol. This is a common method used by older Beijingers.
Maintenance method three:
Keep dry
Coping season
In areas where the seasons change significantly, the maintenance of furniture is extremely particular. For example, after the volatility, spring and autumn, etc., the climate will change from tide to dry or from dry to wet. The cabinet door should be opened and the drawers should be opened in time to make the furniture inside and outside synchronize with the wind, so as to avoid warping due to too dry or too wet.
However, when the wind is too cold, the furniture should not be exposed to the sun or the tuyere, and should be placed in a cool, dry place. Because excessive sunlight can damage the material of wooden furniture and cause cracking or warping of the wood, it is necessary to ensure that the ancient furniture is not exposed to sunlight while maintaining its moderate dryness.
Maintenance method four: waxing
If the furniture is used for a long time, the gloss will gradually disappear, affecting its beauty.
In this case, the floor wax, beeswax, etc. can be softened in the sun or on the fireside, and the old shoe brush is repeatedly drawn, so that the brush is covered with a lot of tiny wax particles. Then use this brush full of wax particles to repeatedly brush on the furniture, this method is called "dry shake wax." After the "dry shake wax" treatment, the tarnished furniture immediately "red light", more effective than female cosmetics. It can also be waxed directly with purchased Bi Li beads or floor wax.
It should be noted that waxing should be carried out after the dust has been completely removed, otherwise wax spots will form or scratches will occur. When waxing, it is necessary to master the principle of shallow to deep, from point to surface, step by step, and evenly wax. Of course, the most ideal is to go to the professional manufacturers to wax.
Another method is to wax the wax, dry the wax on the surface of the furniture, then use a hot hair dryer to blow the wax into a liquid, brush it with a brown brush, wait for it to cool and solidify, and then use a wood chip or bamboo to surface Remove the floating wax, and finally use a brown brush and cloth to "shake" and polish. This is a more professional and difficult method. If you don't get it, you will make the patina a "new". It is not recommended for amateurs and novices to adopt.
Maintenance Method 5: Respond to the looseness and shedding of furniture parts
If you encounter loose parts in the furniture, don't be nervous. In fact, the more furniture made of high-quality wood, the more likely it is. Try using a toothpick, white glue or cardboard to tuck it and tighten it. Never use 502 to stick it.
If the parts of the furniture fall off (such as a drawer ring, etc.), the most important thing to note is that the part that is detached is protected, and the jargon is called "the dead body is inseparable." This detached part can be tied to the furniture with the same color of wool, if it is a part of the cabinet or drawer, it can also be placed in a cabinet or drawer. Don't let it go freely, so as not to lose it for a long time or to abandon it for other reasons. Otherwise, once it can be repaired, if you can't find the missing parts, it is almost impossible to find the original parts.
If the furniture is too loose, you can use a rope to tie it or put it in a sack, and then ask the expert to repair it. Never use a chemical product such as tape to bond it to avoid mishandling.
Maintenance method six: dust removal
Due to environmental pollution, more and more dust in the air, especially in the city, so the protection of furniture has added a key lesson. Many furniture have carved parts or complicated hollow parts, especially easy to accumulate dust, can be wiped with soft cotton cloth, but remember two points:
First, you can't use towels. Because the hair of the towel is a small ring structure composed of wires, it will damage the carved, corner and fine cracks of the wood grain;
Second, you can not use a damp cloth. Wet cloth is the natural enemy of ancient furniture, it will bring about the dramatic changes in the wet and dry surface of the furniture. When the moisture and dust in the wet cloth are mixed, it will form a granule. Once rubbed, the surface of the furniture will be damaged, which will damage the original patina of the furniture, and the furniture surface will be cracked in the future. If there is too much dust, wipe it with a damp cloth that dries with water.
Of course, Tibetans can also use vacuum cleaners. Some of the dust that cannot be removed from the complex parts of furniture (such as carved parts, hollow parts, etc.) can be borrowed from the power of modern machines.
There are two main advantages to dusting furniture. One is to protect the pulp of the furniture and even to add the pulp. The pulping directly affects the beauty and life of the furniture. Secondly, it will not cause “dust to moveâ€, resulting in two Pollution, creating a safe and comfortable environment for the storage and appreciation of furniture, is very beneficial to furniture and people.
Maintenance method seven:
Reasonable placement
There is also a certain relationship between furniture placement and maintenance. In the bungalow, the case, the cabinet, and the table should be kept at a distance of one centimeter from the wall, and should not be close to the wall. Because if it is too close, the moisture on the brick wall will erode the furniture, make the furniture damp, and damage the wax layer or patina on the furniture surface, thus damaging the wood.
Furniture with drawers, do not put heavy objects and blunt objects, so as not to crush and scratch, nor to step on, especially in the dry season, the most vulnerable.
Portable Autoclave is a small sterilization equipment, through heating, make the sealed pot produce steam higher than 100C, so as to achieve the purpose of sterilization.
The Steam Sterilizer mainly uses electric heating wire to heat water to generate steam and maintain a certain pressure. It mainly consists of a sealed barrel, a pressure gauge, an exhaust valve, a safety valve, a heating wire, etc.
Working principle:
In a closed steamer, the steam can not be spilt, and the pressure keeps rising, so that the boiling point of water increases continuously, and the temperature in the pot increases. Under the pressure of 0.1MPa, the temperature of the pot is 121. At this steam temperature, the bacteria and their high heat resistance can be quickly killed.
Portable sterilizer capacity: 18L, 24L.
More product information, please kindly contact our salesman.
Portable Autoclave
Portable Autoclave,Portable Dental Autoclave,High Pressure Portable Autoclave,Portable Laboratory Autoclave,Portable Steam Sterilizer,Portable Autoclave Sterilizer
Zhengzhou mingyi instrument equipment co.,ltd , https://www.mingyint.com