The high-end furniture of the once-in-a-lifetime Da Vinci, recently fell a chicken feather. Is there any reason to say that "exports are re-imported as long as they are legal"? Qiu Baochang, a special observer of the Economic Voice and a lawyer of Huijia Law Firm, believes that although “one-day tour†is legal, it is illegal to conceal the place of production and mislead consumers. Consumers should use legal weapons to protect their rights according to actual conditions. Zhongguangwang Beijing July 19th According to the Voice of Economics, "Chaoguang Finance and Economics Observation" reported that after being exposed by the media, the high-end furniture Da Vinci, which was once invincible, has recently fallen into a feather. As of the latest report, Da Vinci's stores in Hangzhou and other places have been seized. Da Vinci's Guangzhou store has encountered a luxury car jam, and customers demanded a return. The Da Vinci brand became garbage almost overnight. However, in the controversy of a negative public opinion, some people came forward to da Vinci. According to media reports, Zhu Changling, chairman of the China Furniture Association, said that there are common sense problems in the questioning of Da Vinci furniture. In fact, international brands can have different production sites, as long as they indicate the origin. Products are exported from China and then imported into China, as long as they meet the legal requirements, it is ok. When this was said, it caused a lot of dissatisfaction among many consumers, especially those who had bought Da Vinci products. The origin of the counterfeit products and the “free-day zone†of the bonded area have changed in value and the quality is not in line with the international brand identity. These negative keywords have become the brand that Da Vinci’s brand can’t erase. According to some media reports, a consumer in Chongqing found that Da Vinci's dining table and chair, floor clock and other large pieces of furniture less than two months later found that the dining table and chair paint fell off seriously, the landing clock was not allowed. The consumer said angrily: We are busy now, time is not enough, where is the time to accompany the clock every day to proofread the time? Then, is there any reason to say that "exports and re-imports are legal only?" Qiu Baochang, a special observer of the Economic Voice and a lawyer of Huijia Law Firm, believes that although “one-day tour†is legal, it is illegal to conceal the place of production and mislead consumers. Consumers should use legal weapons to protect their rights according to actual conditions. Moderator: Da Vinci furniture has been in trouble for a long time. The chairman of the China Furniture Association came out and said something at this time. It is okay to export from China to Da Vinci and import it into China. This view sounds uncomfortable. First of all, please analyze it. Is it legal to implement a “one-day tour†in a bonded area in China like our well-known international brand products? Is it legal to arrive at Finch specifically? Qiu Baochang: The "One-Day Tour" of the Chairman of the China Furniture Association said that it was the first time to go out, then enter the customs, enter the bonded area, handle the export procedures, import procedures, and count the imported products in compliance with relevant regulations. However, the legality of this import procedure does not affect Da Vinci's ultimate civil liability, because Da Vinci marked the origin of the product? Is it a false promise of product quality? This is the most critical. Our country has set up a bonded area to handle the customs clearance and customs clearance procedures, as the regulations themselves are allowed. However, after the so-called import, the origin of the furniture did not change. The people pay attention to the place of origin. If the furniture manufacturer turns the furniture into imports through this form and advertises that Italy is the origin, it is suspected of concealing the truth from the public and consumers. The key is to be wrong in this place, "day trip" itself has no problem. If the origin of the mark is a certain place, it is exported through bonded duty, and then sent from the bonded area to the designated place for import, but where the furniture is produced, the furniture manufacturer should clearly tell the ordinary people that it should be clearly stated in the publicity to the consumers. Now Da Vinci has created the illusion of pure importation for the people through this "one-day tour", which is suspected of misleading. Moderator: That is to say, after the "day trip", the brand is called Da Vinci. It doesn't matter, but the key is to indicate that it is Chinese production on the place of origin, not to indicate Italian production? Qiu Baochang: It is necessary to indicate the origin, and the import must also be marked, especially when it is sold. I believe that Da Vinci furniture is clearly marked in the procedures for customs clearance and customs clearance, but how to promote and promise in the market. What the people are most concerned about is whether Da Vinci deceives the consumer, whether he has concealed the truth, and whether it is legal or not. "One-day tour" is a bonded area set up by our country. It is not illegal in itself and is in compliance with relevant regulations. The key is that Da Vinci concealed the facts and deceived consumers after entering the customs, which is suspected of breaking the law. Is this the case that the relevant departments have to find out that if this is not the case, it cannot be said that Da Vinci is illegal. The chairman’s teaching is based on this situation. The origin of goods imported from the bonded area is not necessarily foreign or domestic, but it is also an imported product. But where is the origin of imported products? This issue is very important. Moderator: In fact, many of us know this phenomenon. Nowadays, many foreign clothing, electronic consumer goods, etc., many brands are produced in China, and even some top world famous brands also have this phenomenon. In fact, it is China, but because of the foreign brand, the price is soaring. Is this a very common phenomenon in your opinion? Qiu Baochang: I think this situation should be worth noting. Some brands have misrepresented the public by copying or authorizing domestic production, and after re-exporting through "day trips", without explicit indication of the place of origin, it is easy to confuse the origin and origin of the import. Especially some clothing, shoes and hats, as well as milk powder, and even some top brands are doing this. This reminds us that Da Vinci is definitely not a family, and it is definitely not only in the furniture industry, but also in other industries. Producers use people's trust in foreign brands and brand names to register a trademark, and then the domestic OEM production is not uncommon. Therefore, it is very important for the manufacturer to clearly mark the place of production. This is convenient for consumers to know and choose to buy. If I am suspected of misleading or concealing the place of origin, I think this is suspected of fraud. Moderator: Marking the origin is a very important point, and it is also a point that our consumers should focus on when purchasing products. In addition, everyone also questioned that the reason why everyone buys a foreign brand feels that the quality of the products bought at a large price is in line with this price, but with the phenomenon of “export to domestic sales†more and more, this is happening. Can the products be worthy of the name? In the case of Da Vinci, how should our consumers come to face it? Qiu Baochang: I think it is very difficult to do. The brands produced in Italy may have market recognition in the market for decades or even hundreds of years, including the market's recognition of its production processes, processes, worker proficiency, system and design. If it is converted into domestic production, it is difficult to ensure that the science of production process management, the fineness of organization, and the proficiency of personnel reach the level of foreign origin. If the origin is not marked, people think it is made in Italy, and the fact is that these furniture are not foreign brands that stand out through market competition and market recognition. So I think that in this case, if Da Vinci is counterfeit, or does not indicate the place of origin, but is authorized by foreign countries, domestic production and then "day trip" exports, then Da Vinci costs lower, profit More, you can get a high profit. In the future, if this situation is not effectively regulated, it may become more and more. Moderator: How should our consumers respond to such a situation? Qiu Baochang: It is not that all Da Vinci products are illegal and illegal. Some of them may be, and there may be many products that are not legally prescribed and slightly fraudulent. They are suspected of false propaganda and are suspected of falsifying the place of origin. They may also be forged or not. Qualified, as consumers should distinguish whether they are misled according to the specific circumstances, whether the manufacturer has a false promise, according to different circumstances, in accordance with the "Contract Law", "Consumer Protection Law" and "Product Quality The relevant provisions of the Law to protect their rights. You can request a return, compensate for the loss, or you can ask for double compensation. This cannot be generalized, but relevant evidence should be obtained based on the specific problems and problems encountered in the purchase of goods.
PEEK Plastics,Polyether ether ketone, known in English as polyetheretherketone plastic (PEEK Plastics), is a linear aromatic polymer containing chain sections in the main chain of molecules.Its constituent units are oxygen-pairs of phenyl-oxycarbonyl - pairs of phenyl, semi-crystalline, thermoplastics.
Product name: polyether ether ketone (PEEK Plastics) resin is a kind of excellent special engineering plastics, PEEK Plastics has more significant advantages compared with other special engineering plastics, resistance to high temperature is 260 degrees, mechanical performance, good self-lubrication, resistance to chemical corrosion, flame retardant, stripping resistance, abrasion resistance, no strong sulfuric acid, nitric acid resistance, radiation resistance, strong mechanical properties can be used for high-end technology such as mechanical, nuclear engineering and aviation.
PEEK Plastics has heat resistance, chemical stability and the forming process of thermoplastic plastic. PEEK Plastics has excellent heat resistance.Its thermal deformation temperature of 160 ℃, with 20% ~ 30% Glass Fiber reinforced, heat distortion temperature can be increased to 280 ~ 300 ℃.Polyether ether ketone is good, the thermal stability of 420 ℃ in air.2 h under weightlessness is only 2%, at 500 ℃ was 2.5%, significantly thermo-gravimetric 500 ℃.Polyether ether ketone of long-term use of temperature is about 200 ℃, under this temperature, still can keep the high tensile strength and bending modulus, PEEK Plastics is also a kind of very strong material, has excellent resistance to creep and fatigue performance for a long time.
PEEK Plastics electrical insulating performance is very excellent, volume resistivity of about 10 ~ 10 Ω · cm.It still has small dielectric constant and dielectric loss in high frequency range.For example, in 10Hz, the dielectric constant in the room is only 3.2 and the dielectric loss is only 0.02.
The chemical stability of polyether ether ketone is also very good. In addition to concentrated sulfuric acid, almost any chemical reagent is very stable, even at high temperature, PEEK Plastics can maintain good chemical stability.In addition, PEEK Plastics has excellent heat resistance and steam resistance.In 200 ~ 250 ℃ steam can be used for a long time.
PEEK Plastics with good flame retardancy, in normal circumstances it is difficult to burn, even burning, smoke and harmful gas release a quantity to also is very low, even lower than low smoke volume of polymer such as ptfe.In addition, PEEK Plastics has excellent radiation resistance.Its resistance to alpha rays, beta gamma rays and gamma rays is the best current polymer material.The wire products covered with it can withstand gamma rays of 1.1 x 10Gy.
The polyether ether ketone has good fluidity and thermal stability at the melting point.Therefore, PEEK Plastics has the typical processing performance of thermoplastic plastic. Therefore, it can be used for injection molding, extrusion, blow molding and laminating, and also spinning and making films.Although the polyether ether ketone melt processing temperature range is 360 ~ 360 ℃, but because of its thermal decomposition temperature above 520 ℃, and it still has the very wide processing temperature range.
Although the development history of PEEK Plastics is only a short 20 years, but because PEEK Plastics has the outstanding heat resistance, chemical corrosion resistance, radiation resistance and high strength, easy to machining, PEEK Plastics is currently in the nuclear industry, chemical industry, electronic appliances, machinery, instrument, automobile industry, and has been widely used in aerospace field.In particular, thermoplastic resin, which is excellent in heat resistance, can be used as the base material of high performance composite materials.
modified
PEEK Plastics performance of the pure material is difficult to meet the different needs of different industries, in special working environment need to modification of PEEK Plastics, its main means blending modification, copolymerization modification, reinforced composite, infill modification, nanometer modification and surface modification technology.The modification can increase the performance of PEEK Plastics, such as wear resistance, impact strength, etc., thereby extending the application range of PEEK Plastics, reducing the cost of materials and improving the processing performance of PEEK Plastics.
Application
PEEK Plastics has been widely used in aerospace, automotive manufacturing, electronics, medical and food processing.
PEEK Plastics has excellent performance, its application field will be more widely with the domestic application research, the current domestic set up the chongqing sanxin materials research center is a professional engaged in the research of PEEK in the field of application.The research center is under the chongqing government entities at all levels of leadership and care, is committed to in the field of automobile, electrical and electronic fields, transportation research, in the present walk at the forefront of the domestic application research.
PEEK Plastic Sheet
PEEK Plastic Sheet,Conductive PEEK Sheet,Esd PEEK Plastic Sheet,Esd Polyetheretherketone Sheet
Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com
