Second-hand housing renovation details of the five elements of refurbishment in place

Many new discs are now on the verge of suburbs and even more distant places. For the majority of young people working in urban areas, second-hand housing in the urban areas has become a hot and primary choice. However, there are many details of second-hand housing renovations that need attention. Do not feel that second-hand housing has already been renovated and its requirements are relaxed. Because many details of second-hand housing, if not properly handled, may have more serious consequences than new homes.

<<<Links: How Old Houses Renovate

Consumers who purchase second-hand housing often have such troubles: There are always special requirements such as partial changes, repairs, refurbishments, or the displacement of existing equipment for the original decoration of the house purchased. However, such "second-hand requirements", general decoration engineering team did not want to live up to the head and do not want to pick up, but the migrant workers decorated "marathon guerrillas" hackers off from time to time.

People who buy second-hand housing are always willing to invest in renovations because the house itself saves a lot of money. If the decoration is not graded, it will be regretful if you live in later. However, compared to new houses, the renovation of second-hand houses is both complicated and cumbersome. In particular, many details cannot be ignored.

The number of second-hand houses is somewhat years, and the previous tenants could not avoid moving their hands and feet. Therefore, the first thing to pay attention to during the renovation is the circuit of the room. Many home appliances now have relatively large power. If they are used for a long time, they will overwhelm the already aged wires. Before the renovation, it is best to ask the electrician to replace all the old wires with new copper wires. The air-conditioning line is preferably a dedicated double-stranded copper wire. The air-conditioning outlet must also be installed separately. It is recommended to use a socket of about 16A. The main switch of the house's power supply (air open) must also be replaced. If you want to use more than 2 cabinet air conditioners, it is best to use about 20A air-open, but it should be noted that the air-opening is not the bigger the better, the family generally does not More than 25A, too much open air to lose the role of power protection.

Once the wires are in place, the walls can be treated. Now, the more popular type is the quick-drying wall paint. The bottom surface of the wall paint should be very clean, while the walls of the second-hand houses have different degrees of stain. Therefore, before painting, be sure to carefully inspect the decoration workers to clean the wall surface and make it clean, so that the brush out of the wall paint is beautiful enough.

After the wall surface is finished, the ground should be finished. The floor of the second-hand house is either covered with floor tiles or wooden floors, or it is cemented. If it is a cement-smoothed floor, new types of floor tiles and wooden floors can now be laid directly. Try harder again. If you have already paved the floor tiles or wooden floors, you have to destroy the resurfacing. There is usually no problem in the living room and bedroom, mainly the kitchen and the bathroom. There is a waterproof layer underneath the ground. When cleaning the old ground, care must be taken to avoid the destruction of the waterproof layer. Once it is destroyed, the house downstairs may appear. The phenomenon of water seepage will cause great trouble for people, so we must do a good water seepage test.

Key points:

1. First scratch the wall, the house wall will be peeling and cracking for a long time, so after handling the wall, brush the primer and then brush the latex paint finish.

2. The doors and windows shall be reconstructed, and the wooden windows shall be peeled. After the treatment, the decorative surface shall be added, and the window can be used continuously. If the steel window is rusted, the aluminum alloy window is changed.

3. For plumbing, electricity should be transformed, the first surface of the water treatment, check the water, heating pipeline is rusted, if rust, aging must be removed to replace the new, modern home appliances are many, according to national standards, the decoration must use 2.5 Millimeter copper wire must be insulated with PVC when it is buried in the wall.

4. To be thoroughly disinfected, spray with 3% lycopene, 1%-3% bleach, or 3% peroxy acetic acid. Sprinkle doors and windows 1 hour after spilling.

5. Do not tamper with the load-bearing structure. The building structure of the old house is not the same as the current standard and must be treated with caution.

Second-hand house paint house decoration window house cement decoration living room floor tile kitchen cabinet door bathroom waterproof bathroom floor tile bathroom door bedroom

Other Roofing Sheet

EXA International Trading (Tianjin) Co., Ltd , http://www.tjsteelplank.com