Access Control Advanced Supurmarket Security Gate Xld-Tdzm1

Advanced  store induced security gate  
Model:  XLD-TDZM1

1. Equipment introduction
Category:
Single core: Used in single channel or multi-channel
Double cores: Used in multi-channel

2. Main function and characteristcs
Functinal features of standard product:
1) With function of self-examine and alarm, it is convenient for maintenance and use.
2) Being able to program running status by the small keyboard in the main board
3) Preventing pedestrians or bicycle from being nipped and from hurt, the force of the pole is less than 2Kg
4) Sound or light alarm function
5) Poles are automatically locked until a opening signal is received.
6) Poles synchronization
7) Automatically reset function: It will automatically lock if the pedestrian hasn't pass through the channel in the pre-set time after the opening. The passing time is adjustable.
8) Channels automatically open when power off, and automatically close when power on.
9) Several card reading devices are attachable.
10) One direction or bi-direction control are optional.
11) It can be directly controlled and managed by remote control.
Extendable functions:
The length of casework and poles is optional.

3. Standard technical parameters
* Framework material: GB 304 grade stainless steel
* Framework size:
Bridge-type round
Angle: L1200*W300*H1000(mm)
* Length of the arms: 250mm
* Width of the channel: 600mm(standard)
* Working voltage: AC220 ± 10% V/50 ± 10% Hz
* Driving electromotor: DC brush electromotor 24V
* Input interface: Dry contact signal or +12V level signal or DC12V pulse signal with width of more than 100ms, driving current: > 10mA
* Normal life-span: 3million times
* Communication interface: RS485 (standard)
* Transit speed: 30-40 persons/min
* Card reader windows: 4 Maintenance windows: 4
* Time for opening or closing: 1 seconds
* Starting time after power on: 3 secconds
* Automatic reset time after fault: 10seconds
* Working environment: Indoor, outdoor( with a tent over)
Temperature: -10° C__ 50° C
Relative humidity: ≤ 90% no condensation

 

Uses the first light feeling technique, the mouth main primary device, micro controls the motherboard.
The performance decides above 1,200,000 times.: 115 seconds (may decide voluntarily).
Technique characteristic: Source: 220vac/50hz
The material is bright: Main crankcase 8K surface not, thick 1.5mm.
Pole 25*1.2mm does not manage.
Column 60*3mm luminous tube, surface.
Pole 38*2.0mm does not manage.
Meets the anxious sentiment, but pushes reverse passes through safely; Returns after again the position eliminates the police, from resumes the use.
May increase enters the police function and the stream of people function reverse.
On the main column has keeps the hole, may with, no matter what agrees in opinion the use.

Epoxy Glass Sheet/plexiglass sheets

Color:Yellow

Thickness:0.5-50mm

Size:1000*2000mm/1020*2020mm

Applications :

• Used in mechanical, electrical and electronic high insulation structure parts

• Used in high-performance electrical insulation requirements

• Chemical machine parts

• General machines parts and gear, generators, pads, base, baffle

• Generator, transformer, fixture, inverter, motor

• Electric insulation component

 

Key Features :

• Flame resistance

• High dielectric strength

• Moisture resistance

• Heat resistant

• Temperature resistance: 150-180℃

• Good flatness, smooth surface, no pits

Epoxy Fiberglass Sheet

Epoxy Fiberglass Sheet,3240 Epoxy Glass Sheet,Fiberglass Laminated Sheets,Epoxy Fiber Glass Sheets

SHENZHEN XIONGYIHUA PLASTIC INSULATION LTD , http://www.xyhplastic.com