Laminate flooring to ensure the quality of the key process


Scholarly door parquet

The bottom layer is the moisture-proof layer, generally made of polyester material, which can block the moisture and moisture from the ground, thus protecting the floor from the wetness of the ground and playing a balance with the above layers.

The base material layer is the main part of the reinforced composite wood flooring. Most laminate wood floorings use the density board as the base material. The density board has many advantages that the original wood does not have, such as the dense and uniform structure of the density board, the average particle distribution, etc. . The weight of the MDF is mainly distinguished by its density value.

The decorative layer is also the pattern layer, above the substrate layer. This layer is made of a specially processed paper. Due to the heated reaction of the tri-hydrogenated ammonia solution, the chemical properties are stable, and it becomes a beautiful and durable surface paper. It has an abrasion resistance of 400 rpm, and it is waterproof, UV resistant, and does not fade.

The wear-resistant layer is a layer of anti-wear agent that is evenly pressed on the surface of the laminate floor. It has surprising wear resistance.

Many consumers are most concerned about wear-resistance when buying reinforced wood flooring, which means that wear is the most important. Actually, this is a misunderstanding. Because the number of wear and wear resistance is not completely proportional to. The wear resistance is mainly determined by the density of Al2O3. The distribution of Al2O3 on the floor surface is too dense, the floor will be brittle, and the flexibility will be weakened. This not only affects the service life of the floor, but also affects the transparency of the floor surface. Gloss. According to European standards, the wear-resistant rotation of ordinary household laminate wood flooring is sufficient for more than 4,500 rpm, and our country's reinforced composite wood flooring has reached this figure. This reminds people from another perspective that the use of reinforced wood flooring does not equate to durability. Therefore, experts suggest that the selection of reinforced wood flooring starts with the selection of convex grooves.

Flooring Flooring Nature Flooring Del flooring

Antimicrobial Powder Coatings

Special Effect Powder Coating,Metallic Powder Coating Co., Ltd. , http://www.cdpowdercoating.com