When a wooden floor starts to make noise or creak, it can significantly affect the mood and comfort of the people in the house. To minimize such sounds during installation, consider the following steps:
First, before starting the installation, ensure that the concrete subfloor is solid, smooth, and dry. Only proceed with the laying when the conditions meet the WB/T1030-2006 standards for wooden floor installation and testing. If the moisture content is too high, install a moisture barrier layer properly sealed to prevent future issues.
Second, the moisture content of the materials directly affects their dimensions. Therefore, it's crucial to test the moisture levels of each structural layer, including the wood joists and the flooring itself, ensuring they meet the required specifications.
Third, choose high-quality wood with good dimensional stability. This helps reduce swelling and lateral movement, which can cause unwanted noises over time.
Fourth, use appropriately sized joists and install them as close to the subfloor as possible. A larger contact area between the joists and the base ensures a more secure and stable installation.
Fifth, avoid using multiple small shims when leveling the joists. Instead, use fewer but more suitable pieces to maintain even support and prevent uneven settling.
Sixth, never use low-quality oil or finish on the wooden floor. Inferior products can damage the surface and lead to long-term performance issues.
Finally, maintain proper indoor ventilation and control humidity levels. This helps prevent warping, cracking, and excessive expansion or contraction of the wood, all of which contribute to noise problems.
(Word count: 508)Chloride Free Sandwich Board Substrate
Chloride Free Sandwich Board Substrate
Shangdong Oushibao New Materials Co.,Ltd , https://www.oushibaomgo.com