200mesh Milled Glass Fiber for Adhesive

Model NO.: XGFT9200
Glass Type: E-Glass
Filament Diameter: 9micron
Fiber Length: 74micron
Moisture: <0.2%
R2o: <0.8%
Loi: <0.2%
Color: White
Aspect Ratio: 8.2:1
Bulck Density: 0.63G/Cc
Trademark: XIANGU
Transport Package: 25kg PP Woven Bag
Specification: ROHS
Origin: Guangdong
HS Code: 7019110090
Model NO.: XGFT9200
Glass Type: E-Glass
Filament Diameter: 9micron
Fiber Length: 74micron
Moisture: <0.2%
R2o: <0.8%
Loi: <0.2%
Color: White
Aspect Ratio: 8.2:1
Bulck Density: 0.63G/Cc
Trademark: XIANGU
Transport Package: 25kg PP Woven Bag
Specification: ROHS
Origin: Guangdong
HS Code: 7019110090
200mesh milled glass fiber for adhesive is milled by ball grinder from fiberglass chopped strands which was treated by high temperature without any sizing,used for reinforcement in composite to increase mechanical properties(impact,tensile,compressive and flexural) ,improve dimensional stability and minimize distortion at elevated temperature.There is no grayish discoloration and it can not affect the color of finished products.

SPECIFICATIONS:
Model: XGFT9200
Color: white
Glass type: E-glass
Mesh: 200
Fiber Diameter 9micron
Average Fiber Length 74micron
Aspect Ratio 8.2:1
Bulck Density 0.63g/cc
Moisture Content <0.2%
Loss of Ignition <0.2%
Alkali content/R2O(%) ≤0.80
Sizing NO
 
PRODUCT PROPERTIES:
1.good flowability: good flowablity can let feeding process is easier when producing plastic compounds using twin-screw extruder or single-screw extruder.Mixing is easier with liquid resin,and the flowability is good.
2.good composite properties:this milled glass fiber was treated by high temperature without any silane coupling agent,so it need adjust formula according to the detailed products.
3.no grayish discoloration:because this model of milled glass fiber was treated by high temperature,so the surface sizing has been excepted,it will not affect the color of white products through high temperature molding.
4.excellent physical and chemical properties: this milled glass fiber has high tensile strength,elastic modulus,so it can reinforce the thermoplastics and thermosetting plastics,and improve its impact,tensile,compressive and flexural properties,improve dimensional stability and minimize distortion at elevated temperature.
 
STORAGE:
The 200mesh milled glass fiber for adhesive  should be keep dry in their original bags and stored in a suitable place,preferably at room temperature with 35-65% relative humidity.Avoid the sun, rain and fire.
 
PACKAGING:
200mesh Milled Glass Fiber for Adhesive

SHIPMENT AND TRANSPORTATION:
1.Shipment by sea:for sea transportation,generally 20pallets(each 1000kg.two layers)be loaded into 20 feet container.total net weight is 20.00 metric tons.
2.transportation by truck:for truck transportation,generally 10 pallets(each 1000kg,one layer) be loaded into truck.
3.transportation by rail:for rail transportation,generally 20 pallets(each 1000kg,two layer)be loaded into train's container.
 
PRODUCT DETAIL IMAGES:
200mesh Milled Glass Fiber for Adhesive
200mesh Milled Glass Fiber for Adhesive
200mesh Milled Glass Fiber for Adhesive
200mesh Milled Glass Fiber for Adhesive
200mesh Milled Glass Fiber for Adhesive
200mesh milled glass fiber for adhesive is milled by ball grinder from fiberglass chopped strands which was treated by high temperature without any sizing,used for reinforcement in composite to increase mechanical properties(impact,tensile,compressive and flexural) ,improve dimensional stability and minimize distortion at elevated temperature.There is no grayish discoloration and it can not affect the color of finished products.

SPECIFICATIONS:
Model: XGFT9200
Color: white
Glass type: E-glass
Mesh: 200
Fiber Diameter 9micron
Average Fiber Length 74micron
Aspect Ratio 8.2:1
Bulck Density 0.63g/cc
Moisture Content <0.2%
Loss of Ignition <0.2%
Alkali content/R2O(%) ≤0.80
Sizing NO
 
PRODUCT PROPERTIES:
1.good flowability: good flowablity can let feeding process is easier when producing plastic compounds using twin-screw extruder or single-screw extruder.Mixing is easier with liquid resin,and the flowability is good.
2.good composite properties:this milled glass fiber was treated by high temperature without any silane coupling agent,so it need adjust formula according to the detailed products.
3.no grayish discoloration:because this model of milled glass fiber was treated by high temperature,so the surface sizing has been excepted,it will not affect the color of white products through high temperature molding.
4.excellent physical and chemical properties: this milled glass fiber has high tensile strength,elastic modulus,so it can reinforce the thermoplastics and thermosetting plastics,and improve its impact,tensile,compressive and flexural properties,improve dimensional stability and minimize distortion at elevated temperature.
 
STORAGE:
The 200mesh milled glass fiber for adhesive  should be keep dry in their original bags and stored in a suitable place,preferably at room temperature with 35-65% relative humidity.Avoid the sun, rain and fire.
 
PACKAGING:
200mesh Milled Glass Fiber for Adhesive

SHIPMENT AND TRANSPORTATION:
1.Shipment by sea:for sea transportation,generally 20pallets(each 1000kg.two layers)be loaded into 20 feet container.total net weight is 20.00 metric tons.
2.transportation by truck:for truck transportation,generally 10 pallets(each 1000kg,one layer) be loaded into truck.
3.transportation by rail:for rail transportation,generally 20 pallets(each 1000kg,two layer)be loaded into train's container.
 
PRODUCT DETAIL IMAGES:
200mesh Milled Glass Fiber for Adhesive
200mesh Milled Glass Fiber for Adhesive
200mesh Milled Glass Fiber for Adhesive
200mesh Milled Glass Fiber for Adhesive
200mesh Milled Glass Fiber for Adhesive

Inoculant

Inoculant,Bean Inoculant ,Legume Inoculant ,Pea Inoculant

Non-ferrous Metal & Products Co., Ltd. , http://www.nbferrosilicon.com