Ceiling can be said to be an indispensable material in interior decoration. Using it can not only improve the overall grade, but also can help you play a role in shielding and make your home more beautiful. The following Xiao Bian will introduce to you the advantages of how to install the ceiling keel and light steel wheel bone ceiling.
How to install the ceiling keel
1, install the side keel
The installation of the side keel must first be carried out according to the requirements, must be along the horizontal keel line on the wall (post), and then use some self-tapping screws to fix it on the wooden brick; for example, a concrete wall ( Column), then we must use the nail to fix it, we must pay attention to the spacing of the shot nail must be smaller than the sub-keel spacing.
2, install large keel
How to install the ceiling keel, when installing the big keel must first install the hanging pieces. Big keel phase connection: Be sure to first install and then connect the pieces, the cable must be straight. Fixed side keel, then you can use the fixed nail, shot spacing is generally in the 1000mm.
3, installation keel
Hanging in the keel: must be installed according to the design of the keel spacing, the first thing to do is to hang the keel, hang it to be installed on the big keel, then its spacing is probably controlled at 500 ~ 600mm.
4, install the keel
Hanging small keel: as the same is to install the small keel spacing in accordance with the requirements, the installation of the small keel through the hanging pieces, the hanging mounted on the middle keel, as its spacing is controlled at 500 ~ 600mm. If the length of the keel is not long enough, when it is lengthened, it can be connected to the opposite end, and then it can be fixed and then adjusted.
5, install the cover panel
After the keel has been installed, it is necessary to start acceptance under the light and rigid framework, according to the specifications of the cover panel to pull it gap to block the block line, and then branch to the sides can be installed.
6, brush anti-rust paint
Light steel skeleton cover panel ceiling, in order to make the welding place is not easy to rust, then it must be rust-proof treatment, for example, should be brush antirust paint before handing over.
What are the benefits of light steel wheelbone ceiling?
Light steel keel This material is made of light steel. It is also used as the main material of the ceiling. It is connected to the floor through the screw during installation. It is also used to fix ceilings or objects, and finally it is fixed. The role of ceiling. The light steel keel plays the role of a fixed support in the integrated suspended ceiling. It cannot be seen outside. Because it has these advantages, it becomes the preferred material for the integrated ceiling fixed support.
Summary: How to install the ceiling keel and what are the advantages of the light steel wheelbone ceiling is relevant to this, the keel installation must be carried out in accordance with its steps, and the keel is also divided into several, at the same time to install It is clear that it has to be successful, and the spacing should be set aside so that the effect of the installation will be more perfect.
Dongguan Maimeng Cultural Communication Co., LTD , https://www.icollectoys.com