1. After the floor is affixed, use a cork block to push the floor surface to smooth out the air.
2, then use 50 or 75 kilograms of steel roller evenly rolling the floor and promptly trim the joints at the edge of the situation.
3. Erasing the glue on the floor surface in time.
After 24 hours, slotting and welding are performed again.
According to the above several processes, the plastic floor can be easily exhausted!
2, then use 50 or 75 kilograms of steel roller evenly rolling the floor and promptly trim the joints at the edge of the situation.
3. Erasing the glue on the floor surface in time.
After 24 hours, slotting and welding are performed again.
According to the above several processes, the plastic floor can be easily exhausted!
Solder Connectors,Brass Soldered Connector,Forging Brass Connector,Brass Faucet Soldered Connector
Jiangmen Xinhui Yilin Co.,Ltd , https://www.ylseiko.com