In the process of home decoration, you often come across various frustrating issues, especially during the renovation phase. These problems can cause a lot of stress and anxiety. Today, we’ve compiled eight common issues that homeowners face during their renovation and provide practical solutions to help you avoid them.
**Problem 1: Overheating Electrical Outlets**
During the installation of electrical outlets, switches, and lights, electricians may not follow proper wiring procedures. This is particularly dangerous when using high-power appliances like water heaters or air conditioners. Poor wiring can lead to overheating, burning, or even electrical fires, which can be costly and dangerous.
**Tip:** Always supervise the electrician’s work and ensure all outlets and switches are checked for heat after installation.
**Problem 2: Tile Falling Off**
Paving walls and floors with tiles is a technical process. If done carelessly, it can result in issues like hollow tiles, poor adhesion, or tiles falling off. The quality of the cement and adhesive used also plays a big role in the long-term stability of the tiles.
**Tip:** Follow the "Quality Acceptance Criteria for Family Room Decoration Projects." Ensure the tiles are flat, firm, and free from cracks, dirt, or uneven joints.
**Problem 3: Cracking Due to Wall Grooving**
When laying pipes, workers sometimes cut grooves into walls or floors. If done improperly, this can damage load-bearing structures or nearby pipes, leading to structural issues and safety hazards.
**Tip:** Confirm the pipeline layout with your contractor before starting. Avoid cutting into load-bearing walls, and be cautious when grooving walls with insulation to prevent cracking.
**Problem 4: Ground Leveling Causing Structural Damage**
Some homeowners have uneven floors and opt for leveling. However, if the workers are careless or use excessive cement, it can increase the floor’s weight and potentially cause structural damage.
**Tip:** Before leveling, prepare the ground properly and use cement mortar. After drying, check the level with a special tool before proceeding.
**Problem 5: Wires Getting Damaged in Conduits**
Wiring is usually hidden inside PVC conduits. If workers aren’t careful, wires can get kinked or damaged, creating electrical risks. Some might even use substandard materials or improper techniques.
**Tip:** Buy your own wires and supervise the installation. Ask for a detailed “pipeline diagram†and mark the locations of wires on the wall for future reference.
**Problem 6: Small Areas Left Untreated**
Small, hard-to-see areas like the top of doors, under window sills, or inside heating hoods are often neglected. This can lead to dust accumulation and difficult-to-clean spots.
**Tip:** Pay attention to every corner. Even small areas should be treated properly to avoid future cleaning issues.
**Problem 7: Paint Peeling at Joints**
When painting walls and matching them with wood or other surfaces, seams can become problematic. Poorly handled joints can lead to mixed paint colors, peeling, or an unattractive finish.
**Tip:** Use masking tape to protect edges when applying different paint colors. Remove the tape carefully after the first coat to ensure clean lines.
**Problem 8: Color Differences After Substrate Treatment**
Proper surface preparation is crucial before applying paint or tiling. If the base isn't treated correctly, it can lead to color variations, discoloration, or poor tile adhesion.
**Tip:** Clean the base thoroughly before applying any coatings. Use the correct mix of bonding agents and materials as per the manufacturer's instructions.
By being aware of these common issues and taking the right precautions, you can significantly reduce the risk of problems during your home renovation. Always stay involved in the process, ask questions, and don’t hesitate to double-check the work. A little extra effort now can save you a lot of trouble later.
Bathroom faucet
Bathroom sink faucet is daily used to brush vyour teeth and wash your hands and face. Choose a ideal tub faucet that is reliable and water-efficient, and fits your style and budget, is crucial. Meiao gets what you need. Our stainless steel bathroom faucets are spot-proof. In addition, these models are anti-fingerprints, and corrosion resistant.Â
Bathroom Faucet,Bathroom Faucet Leak-proof,Lavatory Faucet,Vessel Sink Faucet
Jiangmen MEIAO Kitchen And Bathroom Co., Ltd. , https://www.meiaosink.com