UHB-ZK mortar pump is a cantilever single-stage single-suction centrifugal pump, the most prominent advantage is that it has the most excellent in all plastic wear resistance, impact resistance (especially low temperature Impact), creep resistance (resistance to environmental stress cracking) and excellent corrosion resistance. The following is a small series for everyone to introduce UHB-ZK-type mortar pump product features, I hope for everyone to help. UHB-ZK type mortar pump Product Features Introduction Features: UHB-ZK-type corrosion-resistant mortar pump is a can adapt to a variety of working conditions of the pump, such as the transfer of acid, alkaline solution or slurry; smelting Various corrosive pulp industry; sulfuric acid various types of acid industry; various types of environmental protection industries such as sewage. The pump is both resistant to corrosion and wear, the use of a very wide range. Has the following characteristics: 1) strong wear resistance: the flow of parts are made of steel-lined ultra-high molecular weight polyethylene (UHMW-PE) manufacturing, UHMW-PE wear resistance of plastic first, 4 times higher than nylon 66 (PA66) and polytetrafluoroethylene (PTFE), which is 7-10 times of that of carbon steel and stainless steel. 2) Strong impact resistance: The impact strength of UHMWPE is the first among general engineering plastics, which is 5 times of ABS (ABS) and can work under minus 196 ℃ stable, which is not the characteristics of any other plastic. 3) Excellent corrosion resistance: The pump can withstand a variety of corrosive media (acids, alkalis, salts) and organic solvents at a certain temperature and concentration range, and soak in 80 kinds of organic solvents at 20 ℃ and 90 ℃ for 30 days. Appearance without any abnormalities, other physical properties almost no change. 4) no noise: UHMW polyethylene impact energy absorption of the highest value in the plastic, good sound-deadening, thus minimizing the transmission of liquid generated during the noise. 5) Safe and reliable, toxin-free decomposition: Ultra-high molecular weight polyethylene (UHMW-PE) used in this pump has extremely stable chemical properties and is therefore also suitable for use in the food industry. 6) low coefficient of friction: the pump's internal friction system is only 0.07-0.11, it is self-lubricating. Under water-lubricated conditions, it has a lower coefficient of kinetic friction than PA66 and POM. When working in a sliding or turning form, lubricity is better than when steel and brass are lubricated. 7) good anti-sticking: Ultra-high molecular weight polyethylene (UHMW-PE) excellent anti-sticking, anti-adhesion capacity and PTFE equivalent, it is conveying some high viscosity medium also outstanding. Further reading: Motor IFAT China's top ten brands Guangzhou Exhibition building water pump manufacturers ranking ptc Show article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor : Gogoing (QQ / wechat:) starting: http://beng.liuti.cn/ (service hotline:)
China Portable Electric Stove,Electric Stove,Electronic Hob Manufacturer and Supplier
This kind of goods material ,we use best quality stainless steel and we offer good price to the cusotmers from all over the world .
Portable ELECTRIC STOVE ,Electric Stove,Electronic Hob,Electric Stove Cooker
it is very ealy to clear and tidy it ,it also had the safe device
We are manufacturer of Portable Electric Stove in China, if you want to buy Electric Stove,Electronic Hob,Electric Stove Cooker please contact us.
ELECTRIC STOVE
Portable Electric Stove,Electric Stove,Electronic Hob,Electric Stove Cooker
GUANGZHOU AIJINGSI TRADING LIMITED , https://www.aichugashob.com