At home, many homeowners are confused about the steps and sequence of home improvement. As a result, they cause a lot of troubles. Here's a detailed introduction: First, floor or first wardrobe , and floor and furniture. I hope we can give you some help and inspiration.
First floor or first wardrobe :
First, the first floor or the first wardrobe is good --- carpenter at the scene
If it is a custom closet, then generally do not floor, directly on the floor of the room to be close to the wardrobe, but this has good and bad, we can compare and analyze, so only knowing.
1, no floor: save money, save materials, but not removable, can not move, follow-up maintenance is too much trouble, so we must make a careful decision, not sloppy.
2. Flooring: Prevent the water stains on the ground from permeating under the closet to prevent dampness of the cabinet, resulting in rotting, infiltration, etc., and make your wardrobe dry and tidy.
3, after the shop floor: In order to prevent the installation of a good floor is damaged, the first wardrobe, do the floor, this can effectively reduce the floor damage, extend the floor life.
Second, the first shop floor or the first wardrobe is good --- custom wardrobe, buy finished cabinet
Whether it is a custom wardrobe or a finished wardrobe, you must first install the floor before entering the market, and then the wardrobe can enter the stadium. However, when assembling, be sure to protect the floor, not scratching, so as not to affect the appearance of the floor and use Years of age.
Third, the first floor or the first wardrobe is good --- attention
1, the best floor color with the wardrobe is not the same.
2, pay attention to the connection with the baseboard.
3, pay attention to switch socket and wardrobe position.
4, if the floor is done first, pay attention to protection.
The floor and furniture have entered the order of introduction:
1. First of all, during operation, it is necessary to install according to the order of the door-floor-furniture, but when installing the floor, pay attention to the following questions: 1. Let the manufacturer measure the area of ​​the ground and see if it is necessary. Leveling. 2. Before installation, clean the floor and keep the floor dry. Do not clean it with clean water. 3. Before the installation, cut the floor in the hallway.
2. Secondly, the time for the furniture to enter the market should be determined according to the time of furniture purchase. After the water and electricity are completed at the earliest, it can only be bought into the market, so that the size of the furniture is more certain.
The article is summarized: The first floor or the first wardrobe and the floor and the introduction of the furniture introduction of the relevant knowledge is introduced here, at home, must pay attention to the floor and the furniture has entered the sequence, so as not to protect the floor, affecting the overall The beauty of home.
1. Technical standard: BS EN 10202, DIN EN 10203, GB/T2520 , JIS G3303
2. Steel type: MR, SPCC
3. Thickness: 0.115 - 0.50 mm
4. Width: 600 - 1050 mm
5. Length: 600-1200mm
Tin Coating: ordinary 2.8 or 2.8g and 5.6g or 5.6g, we can produce according to customer's requests
Excellent barrier property. Double pin hole dectecters during production, can 100% avoid pin hole defects.
Paint Bucket Tinplate,Paint Bucket Tin Cans,Tin Metal Bucket For Paint,Metal Paint Bucket
Jiangsu Global Packing Technology Co., Ltd , https://www.cntinplate.com