When we decorate or decorate some houses, we may need to make a small hole in the tile, but what should we do? If we look at this tile bit , friends will definitely ask what is the tile bit? Tile bit What is it for, what kind of working principle it has, and what is the right way to use the tile bit if it is good if the tile bit is good.
First, the working principle of tile bit
Tiles can also be used with professional speed-regulating hammers, which will make it more convenient during operation, and the accuracy will be improved. When the speed-regulating hammer is used for tile drilling, it starts to use low speed on the tile surface. Increase the speed to ensure that the tiles are intact and not broken.
Second, the use of tile drill bit
1. The position that needs to be punched is pre-calibrated to ensure the level.
2, when using a glass drill to punch holes in the tile, first tilt a direction to make a pit; otherwise the tile is too smooth and not well positioned; or not full tile, use a nail to directly make a small pit; It is best to use a plate that has holes (small size).
3, set a shallow mark to remove the positioning of the orifice plate, and then. Prepare a water bottle in advance, drill a hole in the bottle cap, and fill the bottle with water. Then, when punching, you should also moisten the water to the contact parts of the drill bit and the tile; especially for the full tile, there must be water.
4. There is no need to change the impact drill bit. Penetrate the tile section and continue to drill the screw depth. Pay attention to a hole, remove the glass drill bit, and unblock the hollow part of the blocked drill bit.
5. When performing tile drilling operation, it is recommended to use a hammer drill to make a small point in the eye-catching position. This can effectively prevent the drill bit from slipping on the tile surface. In the tile eye operation, the drill of the ordinary hammer can also be pulled out halfway.
6. Do not let the hammer touch the tail of the drill bit, so that the electric hammer has no impact on the wall surface, which can effectively ensure that the tile is not broken. If it is a vitrified tile or a high-density tile, you can use a glass drill bit to punch the tile in the eye-catching position and then use a hammer to drive it in.
Third, the tile drill bit notes
1. When performing tile drilling, it should be noted that if the expansion bolt is used for fixing the object, it is necessary to select the required impact hammer bit according to the size of the bolt used. The nominal diameter of the bolt thread is +2. If the tile hole is larger than 10mm, it is recommended that the novice be divided into two during operation.
2. First, pre-punch the hole with a 6-8mm diameter drill bit, and then ream the hole with the drill of the required diameter to ensure that the tile is not broken. It is very necessary to use and determine the punching point and sealing glue. It can effectively prevent the enamel on the tile surface from causing cracks and falling.
The working principle of the tile drill bit introduces us to understand what is the tile drill bit, and we have seen the correct operation method of the tile drill bit. This tile drill bit is also used a lot. Our friends will want to know more about the decoration information in the future. Come to our renovation home network and continue to pay attention to thank you.
JIANFA SANITARY WARE INDUSTRY CO., LTD , https://www.jfsanitary.com