Decorative wall panels may have been seen in some other places. We also have decorative wall panel style effects display in our drawings. Do you like it? The new popular way of decoration today is to use this decorative wall panel. The advantage of decorative wall panels is that What, how do you buy this decorative wall panel before using the decorative wall panel ? Don't worry, now you can see the following content of our article.
First, the advantages of decorative wall panels
1. Regardless of the type of sheet, the glue is indispensable in the manufacturing process. Therefore, the formed sheet will release free formaldehyde, but it is harmless to the human body at a certain concentration, and the consumer recognizes the quality of the sheet. At the same time, the most important concern is the amount of formaldehyde released from the panels used in furniture.
2, according to national standards, the amount of formaldehyde released per 100 grams of particle board should be less than or equal to 30 mg; the emission of formaldehyde per 100 grams of E1 grade MDF is less than or equal to 9 mg; the emission of formaldehyde in E2 grade MDF Between 9 mg and 40 mg. That is to say, the amount of formaldehyde released is higher than the above-mentioned standard plate furniture, it is not suitable for purchase. Consumers can ask the merchant to issue a test report of the furniture substrate to identify whether the indicator meets the requirements.
3, the decorative panel itself is very toxic, relatively stable, and will not be free of toxicity after curing. Whether the decorative panel of the furniture will pollute the air depends on the medium-density board or the particleboard substrate used in the decorative panel. If the formaldehyde emission of the substrate reaches the environmental standard, the decorative panel will not aggravate the air pollution.
4. The decorative panel board has no odor, and the odor is caused by the medium-density board of lower quality, the binder used in the coating or the formaldehyde contained in the additive . Want to find a plate that does not exist in formaldehyde is not available, the decorative panels on the market have also reached the level required by the state, but the accumulation of a variety of furniture is easy to make the formaldehyde in the house after renovation, so keep a few ventilation after renovation Month, stay in the air until the harmful gases in the air meet the national standards.
Second, the decorative wall panel purchase attention
1. Choose a sheet with low formaldehyde emission. When choosing, avoid decorative panels with a pungent odor.
2, recognize the difference between artificial veneer veneer and natural wood veneer veneer. The texture of the former is basically straight texture, the texture pattern has rules; while the latter is a natural wood pattern, and the natural variability of the texture pattern is relatively large and irregular.
3, decorative is better. The appearance of the decorative panel should have a good aesthetic, the material should be fine and even, the color is clear, and the wood grain is beautiful. The texture of the matching board and the parquet should be arranged according to a certain regularity, the natural color is similar, and the seam is almost parallel to the edge of the board.
4, the surface should be no obvious defects. The surface of the selected decorative board should be smooth, free of burr groove marks and planing knife marks; there should be no penetration phenomenon and board surface contamination (such as local yellowing and blackening); the surface should be selected as follows without cracks, cracks, no knots, The skin, resin enamel and gum road; the natural warpage of the whole board should be as small as possible to avoid the sand penetration phenomenon caused by the improper operation of the sanding process.
5, no open glue phenomenon. It should be noted that there should be no bulging or delamination between the surface veneer and the substrate and between the layers inside the substrate.
6. Choose good products with clear production enterprises. Most of them have products with clear factory name, factory address and trademark, and their performance is good.
7. The knife method is the most intuitive method to check the bonding strength. It is opened along the glue layer with a sharp flat blade. If the glue layer is broken and the wood is not damaged, the glue strength is poor.
Friends, how about the effect of our decorative wall panel, you can see from the article map, decorative wall panel is not very special! And our decorative wall panel has many advantages and is very practical, we have already learned, In the future, if you choose this decorative wall panel in the market, you can remember to pay attention to the decorative wall panel that we introduce to you in our decoration home network.
More related wonderful reading:
How to identify the type of decorative panel? Different wood types
How to choose a decorative panel? Selection points and cleaning and maintenance
What is a decorative panel? What are the decorative panels?
Sodium Acetate,Sodium Acetate Buffer,Sodium Acetate In Food,Sodium Acetate Buffer Ph 7
Shaanxi United Xingchuang International Co., Ltd. , https://www.lxcgj.com