As we all know, the oil pump literally must be related to oil, it can be used to transport oil, pressurized, it can be said where there is a liquid flow there should be the existence of the pump, pump a wide range of uses, the effect is excellent . In particular, KCB series of gear pumps and CYZ self-priming centrifugal pumps, these two types of pumps are widely used in shipyards and a variety of industrial applications. Gear pump purposes: suitable for the delivery of viscosity less than 1500cst with non-corrosive lubricating nature, Du Yu 100 degrees of material. Import and export at the same level, flange and thread connections in two ways, the maximum pressure up to 4 MPa. Use of stainless steel pumps: for conveying corrosive and viscosity less than 1500cst, with lubricating properties of the temperature below 120 degrees medium, if the viscosity is greater than 1500cst, then long to choose stainless steel high viscosity pump, the model is of course NYP or LCX Roots pump is the best. However, stainless steel pumps withstand relatively little pressure, the maximum only 2.5 MPa, the maximum flow rate can reach 60 cubic meters / hour. Uses of high-temperature oil pump: The pump body has been cast in the casting of a hollow sandwich pump body, the pump body can be through the thermal oil or steam, cold water and other media to pump medium transported insulation and heating Role, suitable for conveying solidified at room temperature medium. Such as asphalt, resin and so on. Conveyor with a corrosion of corrosive materials, then we must choose stainless steel insulation pump.
