On February 25th, as an important event during CCMT2014, it was hosted by the National Development and Reform Commission, the Ministry of Industry and Information Technology, the National Energy Administration and the National Defense Science and Technology Industry Bureau. The China Machine Tool Industry Association and the China Peaceful Use of Military Technology Association The "2014 Symposium on the Application of Domestic CNC Machine Tools in the Military Industry and Energy Equipment Field" was held in Shanghai.
This is the 10th long-term cooperation mechanism symposium organized by the four ministries. With the theme of "cooperation and innovation", the conference exchanged and discussed the 10-year summary of the long-term cooperation mechanism, the future work direction, the development of the machine tool industry, the military industry demand and the long-term mechanism annual plan, and commended the domestic Advanced units and individuals in CNC machine tools. More than 200 representatives from the competent authorities, military, energy and machine tool industries attended the meeting.
Former Deputy Director of the National Development and Reform Commission, Director of the Energy Bureau Zhang Guobao, Director of the Economic Development and National Defense Coordination Development Department of the National Development and Reform Commission, Director Wang Shunian, Director Wu Yiliang, Deputy Director of the Equipment Industry Department of the Ministry of Industry and Information Technology, Wang Weiming, Deputy Director of the National Energy Administration Director of Energy Conservation and Technology Equipment Division Wang Shuqiang, Deputy Director of the National Defense Science and Technology Industry Development Planning Department Song Baoli, Executive Vice President and Secretary General of China Machine Tool Industry Association Chen Huiren, Honorary Chairman of Yu Chengting, China Peaceful Use of Military Technology Association Leaders Li Donghai and Secretary-General Zhang Li attended the meeting and took a seat at the rostrum. Director Wang Shunian presided over the meeting.
Zhang Guobao, Wang Weiming, Song Baoli, Wu Yiliang and Wang Shuqiang made speeches respectively. The speeches of several leaders have fully affirmed the achievements of the long-term cooperation mechanism in the past 10 years, and pointed out the shortcomings and clarified the priorities for the future.
As an advocate of a long-term cooperation mechanism, Zhang Guobao evoked emotionally the hardships of localization of large-scale equipment and played a huge role in the national economic construction. He also proposed that the localization of key equipment should rely on major projects and projects. Live the opportunity.
Chen Huiren pointed out that the 10 years of long-term cooperation mechanism is also the rapid development of CNC machine tools in China for 10 years. The long-acting mechanism has played a positive role in the rapid development and technological innovation of both supply and demand, and is an effective form to promote the transformation and upgrading of the equipment manufacturing industry. one. The domestically produced CNC machine tools have basically met the needs of users with three-axis and three-axis products. The market share has steadily increased. Some high-end machine tools with five-axis linkage function have also entered the military energy industry, achieving zero-to-existence in key processes. More development. At present, the aerospace technology is developing at a high speed, the energy industry is undergoing transformation and upgrading, and the long-term cooperation mechanism is facing new situations, new changes and new requirements. The machine tool association will stand at the new starting point of the long-term cooperation mechanism and work under the leadership of the four ministries. Innovative and pragmatic, the activities more fully reflect the pertinence and effectiveness, and actively promote the localization of CNC machine tools.
The meeting commended the advanced individuals and units of the domestic CNC machine tool application, fully embodies the affirmation of the cooperation between the supply and demand sides, and encourages and promotes the domestic digital machine tool enterprises to provide better services for the military and energy fields.
Director Wang Shunian finally made a concluding speech and put forward three requirements for the long-term cooperation mechanism. First, it is necessary to promote the localization of major equipment with a strategic overall level. Second, it must promote the cooperation of CNC machine tools with greater responsibility. Innovation, third, must deepen reforms to improve long-term cooperation mechanisms.
In the afternoon, the delegates visited Shanghai Sanyi Precision Machinery Co., Ltd. Mr. Mao Zhongwu, one of the founders of Sany Group, received the tour group. Delegates visited the advanced machine tool assembly workshop and the excavator assembly production line.
In the past 10 years, various forms of localization promoted work and activities under the overall framework of long-term cooperation mechanism, effectively promoting the exchange and deep understanding of military, energy and machine tool enterprises, and gradually getting rid of the key and high-end manufacturing equipment. Subject to the passive situation of people, it promotes the harmonious development of industries such as military industry, energy and machine tools. It is believed that in the future field of equipment manufacturing, in promoting the localization of CNC machine tools, the long-term cooperation mechanism will certainly make more and more contributions! On February 25th, as an important event during CCMT2014, it was hosted by the National Development and Reform Commission, the Ministry of Industry and Information Technology, the National Energy Administration and the National Defense Science and Technology Industry Bureau. The China Machine Tool Industry Association and the China Peaceful Use of Military Technology Association The "2014 Symposium on the Application of Domestic CNC Machine Tools in the Military Industry and Energy Equipment Field" was held in Shanghai.
This is the 10th long-term cooperation mechanism symposium organized by the four ministries. With the theme of "cooperation and innovation", the conference exchanged and discussed the 10-year summary of the long-term cooperation mechanism, the future work direction, the development of the machine tool industry, the military industry demand and the long-term mechanism annual plan, and commended the domestic Advanced units and individuals in CNC machine tools. More than 200 representatives from the competent authorities, military, energy and machine tool industries attended the meeting.
Former Deputy Director of the National Development and Reform Commission, Director of the Energy Bureau Zhang Guobao, Director of the Economic Development and National Defense Coordination Development Department of the National Development and Reform Commission, Director Wang Shunian, Director Wu Yiliang, Deputy Director of the Equipment Industry Department of the Ministry of Industry and Information Technology, Wang Weiming, Deputy Director of the National Energy Administration Director of Energy Conservation and Technology Equipment Division Wang Shuqiang, Deputy Director of the National Defense Science and Technology Industry Development Planning Department Song Baoli, Executive Vice President and Secretary General of China Machine Tool Industry Association Chen Huiren, Honorary Chairman of Yu Chengting, China Peaceful Use of Military Technology Association Leaders Li Donghai and Secretary-General Zhang Li attended the meeting and took a seat at the rostrum. Director Wang Shunian presided over the meeting.
Zhang Guobao, Wang Weiming, Song Baoli, Wu Yiliang and Wang Shuqiang made speeches respectively. The speeches of several leaders have fully affirmed the achievements of the long-term cooperation mechanism in the past 10 years, and pointed out the shortcomings and clarified the priorities for the future.
As an advocate of a long-term cooperation mechanism, Zhang Guobao emotionally recalls the hardships of localization of large-scale equipment and the national economy.
The huge role played in the construction, and proposed that the localization of key equipment depends on major projects and projects, domestic CNC machine tools must seize the opportunity.
Chen Huiren pointed out that the 10 years of long-term cooperation mechanism is also the rapid development of CNC machine tools in China for 10 years. The long-acting mechanism has played a positive role in the rapid development and technological innovation of both supply and demand, and is an effective form to promote the transformation and upgrading of the equipment manufacturing industry. one. The domestically produced CNC machine tools have basically met the needs of users with three-axis and three-axis products. The market share has steadily increased. Some high-end machine tools with five-axis linkage function have also entered the military energy industry, achieving zero-to-existence in key processes. More development. At present, the aerospace technology is developing at a high speed, the energy industry is undergoing transformation and upgrading, and the long-term cooperation mechanism is facing a new situation.
With new changes and new requirements, the Machine Tool Association will stand at the new starting point of the long-term cooperation mechanism. Under the leadership of the four ministries, the work will be more innovative and pragmatic, and the activities will fully reflect the pertinence and effectiveness, and actively promote the application of CNC machine tools. Localization.
The meeting commended the advanced individuals and units of the domestic CNC machine tool application, fully embodies the affirmation of the cooperation between the supply and demand sides, and encourages and promotes the domestic digital machine tool enterprises to provide better services for the military and energy fields.
Director Wang Shunian finally made a concluding speech and put forward three requirements for the long-term cooperation mechanism. First, it is necessary to promote the localization of major equipment with a strategic overall level. Second, it must promote the cooperation of CNC machine tools with greater responsibility. Innovation, third, must deepen reforms to improve long-term cooperation mechanisms.
In the afternoon, the delegates visited Shanghai Sanyi Precision Machinery Co., Ltd. Mr. Mao Zhongwu, one of the founders of Sany Group, received the tour group. Delegates visited the advanced machine tool assembly workshop and the excavator assembly production line.
In the past 10 years, various forms of localization promoted work and activities under the overall framework of long-term cooperation mechanism, effectively promoting the exchange and deep understanding of military, energy and machine tool enterprises, and gradually getting rid of the key and high-end manufacturing equipment. Subject to the passive situation of people, it promotes the harmonious development of industries such as military industry, energy and machine tools. It is believed that in the future field of equipment manufacturing, in promoting the localization of CNC machine tools, the long-term cooperation mechanism will certainly make more and more contributions!
This is the 10th long-term cooperation mechanism symposium organized by the four ministries. With the theme of "cooperation and innovation", the conference exchanged and discussed the 10-year summary of the long-term cooperation mechanism, the future work direction, the development of the machine tool industry, the military industry demand and the long-term mechanism annual plan, and commended the domestic Advanced units and individuals in CNC machine tools. More than 200 representatives from the competent authorities, military, energy and machine tool industries attended the meeting.
Former Deputy Director of the National Development and Reform Commission, Director of the Energy Bureau Zhang Guobao, Director of the Economic Development and National Defense Coordination Development Department of the National Development and Reform Commission, Director Wang Shunian, Director Wu Yiliang, Deputy Director of the Equipment Industry Department of the Ministry of Industry and Information Technology, Wang Weiming, Deputy Director of the National Energy Administration Director of Energy Conservation and Technology Equipment Division Wang Shuqiang, Deputy Director of the National Defense Science and Technology Industry Development Planning Department Song Baoli, Executive Vice President and Secretary General of China Machine Tool Industry Association Chen Huiren, Honorary Chairman of Yu Chengting, China Peaceful Use of Military Technology Association Leaders Li Donghai and Secretary-General Zhang Li attended the meeting and took a seat at the rostrum. Director Wang Shunian presided over the meeting.
Zhang Guobao, Wang Weiming, Song Baoli, Wu Yiliang and Wang Shuqiang made speeches respectively. The speeches of several leaders have fully affirmed the achievements of the long-term cooperation mechanism in the past 10 years, and pointed out the shortcomings and clarified the priorities for the future.
As an advocate of a long-term cooperation mechanism, Zhang Guobao evoked emotionally the hardships of localization of large-scale equipment and played a huge role in the national economic construction. He also proposed that the localization of key equipment should rely on major projects and projects. Live the opportunity.
Chen Huiren pointed out that the 10 years of long-term cooperation mechanism is also the rapid development of CNC machine tools in China for 10 years. The long-acting mechanism has played a positive role in the rapid development and technological innovation of both supply and demand, and is an effective form to promote the transformation and upgrading of the equipment manufacturing industry. one. The domestically produced CNC machine tools have basically met the needs of users with three-axis and three-axis products. The market share has steadily increased. Some high-end machine tools with five-axis linkage function have also entered the military energy industry, achieving zero-to-existence in key processes. More development. At present, the aerospace technology is developing at a high speed, the energy industry is undergoing transformation and upgrading, and the long-term cooperation mechanism is facing new situations, new changes and new requirements. The machine tool association will stand at the new starting point of the long-term cooperation mechanism and work under the leadership of the four ministries. Innovative and pragmatic, the activities more fully reflect the pertinence and effectiveness, and actively promote the localization of CNC machine tools.
The meeting commended the advanced individuals and units of the domestic CNC machine tool application, fully embodies the affirmation of the cooperation between the supply and demand sides, and encourages and promotes the domestic digital machine tool enterprises to provide better services for the military and energy fields.
Director Wang Shunian finally made a concluding speech and put forward three requirements for the long-term cooperation mechanism. First, it is necessary to promote the localization of major equipment with a strategic overall level. Second, it must promote the cooperation of CNC machine tools with greater responsibility. Innovation, third, must deepen reforms to improve long-term cooperation mechanisms.
In the afternoon, the delegates visited Shanghai Sanyi Precision Machinery Co., Ltd. Mr. Mao Zhongwu, one of the founders of Sany Group, received the tour group. Delegates visited the advanced machine tool assembly workshop and the excavator assembly production line.
In the past 10 years, various forms of localization promoted work and activities under the overall framework of long-term cooperation mechanism, effectively promoting the exchange and deep understanding of military, energy and machine tool enterprises, and gradually getting rid of the key and high-end manufacturing equipment. Subject to the passive situation of people, it promotes the harmonious development of industries such as military industry, energy and machine tools. It is believed that in the future field of equipment manufacturing, in promoting the localization of CNC machine tools, the long-term cooperation mechanism will certainly make more and more contributions! On February 25th, as an important event during CCMT2014, it was hosted by the National Development and Reform Commission, the Ministry of Industry and Information Technology, the National Energy Administration and the National Defense Science and Technology Industry Bureau. The China Machine Tool Industry Association and the China Peaceful Use of Military Technology Association The "2014 Symposium on the Application of Domestic CNC Machine Tools in the Military Industry and Energy Equipment Field" was held in Shanghai.
This is the 10th long-term cooperation mechanism symposium organized by the four ministries. With the theme of "cooperation and innovation", the conference exchanged and discussed the 10-year summary of the long-term cooperation mechanism, the future work direction, the development of the machine tool industry, the military industry demand and the long-term mechanism annual plan, and commended the domestic Advanced units and individuals in CNC machine tools. More than 200 representatives from the competent authorities, military, energy and machine tool industries attended the meeting.
Former Deputy Director of the National Development and Reform Commission, Director of the Energy Bureau Zhang Guobao, Director of the Economic Development and National Defense Coordination Development Department of the National Development and Reform Commission, Director Wang Shunian, Director Wu Yiliang, Deputy Director of the Equipment Industry Department of the Ministry of Industry and Information Technology, Wang Weiming, Deputy Director of the National Energy Administration Director of Energy Conservation and Technology Equipment Division Wang Shuqiang, Deputy Director of the National Defense Science and Technology Industry Development Planning Department Song Baoli, Executive Vice President and Secretary General of China Machine Tool Industry Association Chen Huiren, Honorary Chairman of Yu Chengting, China Peaceful Use of Military Technology Association Leaders Li Donghai and Secretary-General Zhang Li attended the meeting and took a seat at the rostrum. Director Wang Shunian presided over the meeting.
Zhang Guobao, Wang Weiming, Song Baoli, Wu Yiliang and Wang Shuqiang made speeches respectively. The speeches of several leaders have fully affirmed the achievements of the long-term cooperation mechanism in the past 10 years, and pointed out the shortcomings and clarified the priorities for the future.
As an advocate of a long-term cooperation mechanism, Zhang Guobao emotionally recalls the hardships of localization of large-scale equipment and the national economy.
The huge role played in the construction, and proposed that the localization of key equipment depends on major projects and projects, domestic CNC machine tools must seize the opportunity.
Chen Huiren pointed out that the 10 years of long-term cooperation mechanism is also the rapid development of CNC machine tools in China for 10 years. The long-acting mechanism has played a positive role in the rapid development and technological innovation of both supply and demand, and is an effective form to promote the transformation and upgrading of the equipment manufacturing industry. one. The domestically produced CNC machine tools have basically met the needs of users with three-axis and three-axis products. The market share has steadily increased. Some high-end machine tools with five-axis linkage function have also entered the military energy industry, achieving zero-to-existence in key processes. More development. At present, the aerospace technology is developing at a high speed, the energy industry is undergoing transformation and upgrading, and the long-term cooperation mechanism is facing a new situation.
With new changes and new requirements, the Machine Tool Association will stand at the new starting point of the long-term cooperation mechanism. Under the leadership of the four ministries, the work will be more innovative and pragmatic, and the activities will fully reflect the pertinence and effectiveness, and actively promote the application of CNC machine tools. Localization.
The meeting commended the advanced individuals and units of the domestic CNC machine tool application, fully embodies the affirmation of the cooperation between the supply and demand sides, and encourages and promotes the domestic digital machine tool enterprises to provide better services for the military and energy fields.
Director Wang Shunian finally made a concluding speech and put forward three requirements for the long-term cooperation mechanism. First, it is necessary to promote the localization of major equipment with a strategic overall level. Second, it must promote the cooperation of CNC machine tools with greater responsibility. Innovation, third, must deepen reforms to improve long-term cooperation mechanisms.
In the afternoon, the delegates visited Shanghai Sanyi Precision Machinery Co., Ltd. Mr. Mao Zhongwu, one of the founders of Sany Group, received the tour group. Delegates visited the advanced machine tool assembly workshop and the excavator assembly production line.
In the past 10 years, various forms of localization promoted work and activities under the overall framework of long-term cooperation mechanism, effectively promoting the exchange and deep understanding of military, energy and machine tool enterprises, and gradually getting rid of the key and high-end manufacturing equipment. Subject to the passive situation of people, it promotes the harmonious development of industries such as military industry, energy and machine tools. It is believed that in the future field of equipment manufacturing, in promoting the localization of CNC machine tools, the long-term cooperation mechanism will certainly make more and more contributions!
120W Folding Solar Panel,Folding Solar Panels 120W,120W Folding Panel,Foldable Solar Panel For Camping
Zhejiang G&P New Energy Technology Co.,Ltd , https://www.solarpanelgp.com