Children's furniture spring blossoms, furniture products ushered in the sales season, but recently children's furniture products have appeared in the tide of goods. The national standard for children's furniture "General Technical Conditions for Children's Furniture" will be implemented in August. Yesterday, the reporter found that many furniture manufacturers rushed to promote children's furniture and even cost because they were worried that the existing products could not meet the new standards. An advertisement for sale. The new standard is about to be introduced, furniture manufacturers rushed to pick up the goods yesterday, the reporter visited a number of furniture markets in Shenyang found that affected by the upcoming new standards for children's furniture, the current children's furniture in the city grabs before the new standard is released, many more The furniture store of the children's furniture or the furniture area of ​​the big shopping malls have posted the words "selling" and "concessions", and the discounts range from 3-5 fold. "Children's furniture will be 80% off, and now it's only 30% off. This was unimaginable in the past." A salesman told a reporter in a children's furniture sales area in a furniture city in Shenhe District. For the new standard of children's furniture to be implemented, some furniture manufacturers have known that furniture sales staff said that small enterprises producing children's furniture in Guangdong, Sichuan, Fujian and other places were most affected this time. "Children's furniture itself has high production costs, and this is high. The sub-national standard has increased the market entry threshold, which is a challenge for small businesses. It is reported that many small enterprises that produce children's furniture have been converted into furniture. Some large companies look forward to market shuffling. It is understood that the new standards for children's furniture have severely restricted the harmful chemical components commonly found in furniture. At the same time, specific requirements have been put forward for various indicators such as soft furniture dyes and pH values. In addition to the routine detection of lead, mercury, chromium, cadmium four toxic substances, children's furniture also requires the detection of migratory elements such as bismuth, antimony, selenium, arsenic and so on. According to the reporter's investigation, before the introduction of the General Technical Conditions for Children's Furniture, the production and testing standards for children's furniture can only be applied to adults. Some brand manufacturers use better raw materials to improve the environmental protection level of their products. The new standard is a big blow to small-scale furniture manufacturers, but large companies say that the implementation of the new standard has little impact on their overall sales. The sales staff of a domestic brand furniture company said that the children's furniture produced by the company is in line with international standards, and basically meets the new standards for children's furniture. Even in the details of some furniture production, it is higher than the national standard. “Therefore the overall impact is not too big,†said the salesperson. A person in charge of a small-scale furniture factory in Shenyang said that their furniture factories usually produce children's furniture after receiving orders. Currently, there is no inventory, but the current market is affected by the new standards, and merchants are fighting price wars. The price of children's furniture has generally declined, and the cost of production will increase after the implementation of the new standard, which will have a certain impact on enterprises. Manager Zhang, who is responsible for sales of a large children's furniture in China, introduced that their companies participated in the formulation of this new standard, which strengthened the environmental protection and practicality of children's furniture making materials. This makes the production cost higher, some small manufacturers will gradually be eliminated, and the market is more standardized. “In the short term, there will be some low-quality products selling crazy, and the market will return to stability after the implementation of the new standards.†Zhang said. Experts: After the implementation of the new standards, there will be a phase-out. Bai Hong, secretary-general of the Liaoning Provincial Furniture Association, revealed that there are more than 2,000 furniture manufacturers in the province. The local enterprises and foreign companies that produce children's furniture account for half of each, but because of many Shenyang locals. The furniture produced is distributed to third-tier cities, so there are more foreign furniture companies seen in the local area. Bai Hong said that with the advancement of urbanization and urban construction, consumers buy furniture is a rigid demand, so children have great market potential. After the introduction of the new standards for children's furniture, it will strengthen the understanding of standards for furniture manufacturers and improve the quality of furniture enterprises. Dong Jinshi, a special expert of the National Environmental Product Quality Supervision and Inspection Center, believes that since the children's furniture market has no relevant regulations and standards, this has made the market more confusing, resulting in more unqualified products in the market, and the production materials contain harmful substances and materials. There are problems with quality and so on. Before the implementation of the new standard, the children's furniture market will be reshuffled, and small businesses will be eliminated. Products that are still not up to standard after the implementation of the new standards will be eliminated.
I. Introduction
Cationic Fixing Agent is polyelectrolyte, consists of a series of organic synthesis with low molecular weight and strong cationic, which is generally 100% cationic. Product character is aqueous solution.
II. Performance Indicators:
1. Appearance: colorless to pale yellow viscous liquid
2. Solid content: ≥ 50%
3. PH: 2 ~ 6
4. Viscosity: 50 ~ 200 mpa.s
III. Application Field
Used in paper pulp as a cationic fixing agent. Usually the slurry contains colloidal particles consisted of fiber materials, additives and water, which are with anionic charge and interfere the papermaking process, so it is also known as anionic trash; the interference is mainly in the following aspects:
1. Influence wet chemical additives` normal function, especially for cationic retention and drainage aids, sizing agent; or cause to increase the amount of wet chemical additives;
2. Deposits in the paper machine system; interfere the efficient papermaking process.
3. COD discharge of sewage systems, increasing the load on the sewage treatment plant. Recommended for use in mechanical pulp, chemi-mechanical pulp, and secondary fiber pulp slurry and coating waste stuff. Anionic trash neutralized by fixing agent can be bonded to the fibers so as to be taken away by paper sheets.
IV. Methods of Application
Adding methods: excellent water-solubility; can spread out in water instantly. Dosing pump is generally used to drive it into a static mixer or a mixing pump , mixed with water, diluted to about 0.2% of the dissolved solution, and then into the slurry system.
Adding point: the general adding point is in the front of flow system, that is, before the machine chest or fan pump; or add in the pulp plant. Which is taken into consideration for the reaction time of the cationic fixing agent polymer molecules and garbage, also need to time and space for other wet end additives. According to the slurry source, sometimes you need to select two or more points to add. When the slurry contains a source of coated broke, generally requires additional anionic trash Fixative in the transport of the paper sheet.
Adding dosage: anionic trash content in the slurry is usually gauged by the cationic charge contents measured by PCD (particle charge analyzer) in the slurry. The measure will directly show the dosage tips, but the real dosage depends on the practical application. For general slurry, the recommend amount is in the range of 0.3kg ~1.8kg/t dry pulp.
V. Safe Operation
1. Cationic fixing agent is a water-soluble polymer, dissolved in water in a highly slippery state and avoid to spill on the floor. If spill, shall timely absorb with sand, sawdust.
2. Wear gloves, wear overalls to operate.
VI. Storage
The product should be kept sealed, stored in cool, dry, ventilated places, and appropriate temperature should be 10-30 ℃.
VII. Package
200 kg plastic drums or 1000 kg PE IBC drum.
Fixing Agent
Fixing Agent,Fixer,Anionic Trash Catcher,Charge Neutralizer
Shandong Tiancheng Chemical Co., Ltd. , https://www.tianchengchemical.com
