Disc Magnet with Different Coatings

  • Model NO.: TCD-001
  • Shape: Disc
  • Grade: N35eh
  • Material: Sinered NdFeB Magnet
  • Advantage: Low Weight Loss, Low Temperature Coefficient
  • Specification: ISO9001 & TS16949 & ISO14001& SGS & Rosh
  • HS Code: 85051110
  • Application: Speaker Magnet, Industrial Magnet, Motor Magnet
  • Coating: Zinc
  • Size: Customized
  • Industrial Application: Motor, Generator, Elevator, Automatic Control
  • Trademark: TC
  • Origin: China
NdFeB magnet are widely used in motor, generator, elevator, automatic control, magnetic drive, automobile electronics, sensor & other high-tech field

Neodymium Magnets:

NdFeB magnet
Sintered NdFeB magnet
Rare earth disc magnet
Sintered rare earth magnet
Permanent NdFeB magnet
Linear motor magnet
ABS sensor magnet
Energy saving motor magnet
Powerful Magnetic hook
Voice Coil Motor magnet
Roof motor magnet for Automobile,
Wind turbine generator magnet,
Oil-field motor magnet
Traction motor magnet
Micro motor magnet
Vibration motor magnet

1.Grade:N35-N52, N35M-N50M, N30H-N48H, N30SH-N45SH, N30UH-N40UH, N30EH-N38EH, N30AH-N33AH

2.Shape:Disc, Ring, Block, Segment, Cylinder, Trapezoid, Customized Design (Design proper magnets for clients specific requirements)

3.Coating:Ni, Ni-Cu-Ni, Zn, Tin, Epoxy, Ni-Ag, Ni-Au, etc.

4.Applications of Neodymium Magnet(Neo magnet, NdFeB magnet):Permanent magnetic motor, Energy saving motors, Permanent magnet generators, Permanent magnet traction machine for elevator, Linear actuators, Linear motor, Lifting magnet, NdFeB Pot Magnet, Speaker, Sensors, Earphones and other musical instruments, Magnetic Resonance Imaging, Magnetic Chuck, Magnetic bearings and couplings and other magnetic applications.

5.Size:Customized size per your requirements, largest block length of 150mm, biggest ring of D220mm, smallest thickness of 0.5mm

6.Directions of Magnetization:
A.Thickness Magnetized
B.Axially Magnetized
C.Diametrally Magnetized
D.Multi-poles magnetized
E.Radial Magnetized
F.Customzied specific requirements magnetized

7.Other info
HS Code:85051110
Standard:ISO9001 & TS16949 & ISO14001& SGS
Origin:China
Packing:Carton/Pallet
Transportation:By Express/By Sea /By Air

8.Process Flow:
Raw material---->Strip casting---->Milling---->Pressing---->Sintering---->Performance testing---->Machining---->Coating---->Inspection---->Magnetizing---->Final inspection---->Packing---->Delivery

9.Typical physical properties

Parameter Unit Standard
Curie Temperature °C 310-380
Maximum Operating Temperature °C 80-230
Hardness HV 550-650
Electrical Resistivity ÎœΩ.Cm 150
Density G/cm3 7.40-7.80
Bending Strength Mpa 250
Temp Coefficient of Br %/°C -0.09~-0.13
Temp Coefficient of Hcj %/°C -0.45~-0.70

PET/PVC Aluminum Composite Panel

The Aluminium Composite panel covered with PET or PVC film with various patterns on one side or both side, the application for duilding exterior curtain walls, decoration and renovation additions for old buildings, decoration of interior walls, ceilings, bathrooms, kitchens and balconies.

PET/PVC Aluminum Composite Panel

PET/PVC Aluminum Composite Panel

Kitchen ACP,ACP Partition,ACP Decoration,PVC Aluminum Composite Panel

Hebei Alushine Building Material Co., Ltd , http://www.aluminiumacp.com