Its characteristic is that the molten aluminum liquid is cast into a 6-10mm thick, 650-1400mm wide slab and rolled, and then directly sent to the cold rolling mill for finishing, so that in the production process of the aluminum strip, the ingot is omitted. Processes such as heating, hot rolling, and billet-opening not only shorten the process flow of aluminum sheet and strip production, but also greatly reduce the capital for engineering construction, and also reduce metal burn-in in the production process, save energy, and at the same time facilitate the realization of aluminum plates. Continuous production of strips.
It is used to cold-roll aluminum and aluminum alloy coils, through the unit's uncoiling and cutting head, trimming, joint sewing, surface cleaning, drying, tensile bending straightening, board surface inspection, coiling and weaving process , Get flat, clean, uniform color, neat shape of the roll-shaped product, suitable for the production of flat stone, no grease, surface water, paint coating, decoration and composite high quality products.
Used for horizontal shearing of aluminum and aluminum alloy strips after hot rolling or cold rolling or different length requirements. Machines are processed by unwinding, feeding, cutting flats, trimming waste scraps, and roll leveling. Flat, measuring cutting, teeterboard and other equipment components.
The main product index material, aluminum and aluminum alloy.
Thickness: 0.3-12mm (designed according to different thicknesses)
Width: 600-1560mm
Cut length: 500-4500mm
Machine speed: 90m/min